HCE2-SA-2026-0046 Important HCE 2.0 Security Fix(es): In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: avoid chain re-validation if possible Hamza Mahfooz reports cpu soft lock-ups in nft_chain_validate(): watchdog: BUG: soft lockup - CPU#1 stuck for 27s! [iptables-nft-re:37547] [..] RIP: 0010:nft_chain_validate+0xcb/0x110 [nf_tables] [..] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_table_validate+0x6b/0xb0 [nf_tables] nf_tables_validate+0x8b/0xa0 [nf_tables] nf_tables_commit+0x1df/0x1eb0 [nf_tables] [..] Currently nf_tables will traverse the entire table (chain graph), starting from the entry points (base chains), exploring all possible paths (chain jumps). But there are cases where we could avoid revalidation. Consider: 1 input -> j2 -> j3 2 input -> j2 -> j3 3 input -> j1 -> j2 -> j3 Then the second rule does not need to revalidate j2, and, by extension j3, because this was already checked during validation of the first rule. We need to validate it only for rule 3. This is needed because chain loop detection also ensures we do not exceed the jump stack: Just because we know that j2 is cycle free, its last jump might now exceed the allowed stack size. We also need to update all reachable chains with the new largest observed call depth. Care has to be taken to revalidate even if the chain depth won_x27;t be an issue: chain validation also ensures that expressions are not called from invalid base chains. For example, the masquerade expression can only be called from NAT postrouting base chains. Therefore we also need to keep record of the base chain context (type, hooknum) and revalidate if the chain becomes reachable from a different hook location. (CVE-2025-71160) In the Linux kernel, the following vulnerability has been resolved: net: hns3: add VLAN id validation before using Currently, the VLAN id may be used without validation when receive a VLAN configuration mailbox from VF. The length of vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause out-of-bounds memory access once the VLAN id is bigger than or equal to VLAN_N_VID. Therefore, VLAN id needs to be checked to ensure it is within the range of VLAN_N_VID. (CVE-2025-71112) In the Linux kernel, the following vulnerability has been resolved: crypto: seqiv - Do not use req->iv after crypto_aead_encrypt As soon as crypto_aead_encrypt is called, the underlying request may be freed by an asynchronous completion. Thus dereferencing req->iv after it returns is invalid. Instead of checking req->iv against info, create a new variable unaligned_info and use it for that purpose instead. (CVE-2025-71131) In the Linux kernel, the following vulnerability has been resolved: pNFS: Fix a deadlock when returning a delegation during open() Ben Coddington reports seeing a hang in the following stack trace: 0 [ffffd0b50e1774e0] __schedule at ffffffff9ca05415 1 [ffffd0b50e177548] schedule at ffffffff9ca05717 2 [ffffd0b50e177558] bit_wait at ffffffff9ca061e1 3 [ffffd0b50e177568] __wait_on_bit at ffffffff9ca05cfb 4 [ffffd0b50e1775c8] out_of_line_wait_on_bit at ffffffff9ca05ea5 5 [ffffd0b50e177618] pnfs_roc at ffffffffc154207b [nfsv4] 6 [ffffd0b50e1776b8] _nfs4_proc_delegreturn at ffffffffc1506586 [nfsv4] 7 [ffffd0b50e177788] nfs4_proc_delegreturn at ffffffffc1507480 [nfsv4] 8 [ffffd0b50e1777f8] nfs_do_return_delegation at ffffffffc1523e41 [nfsv4] 9 [ffffd0b50e177838] nfs_inode_set_delegation at ffffffffc1524a75 [nfsv4] 10 [ffffd0b50e177888] nfs4_process_delegation at ffffffffc14f41dd [nfsv4] 11 [ffffd0b50e1778a0] _nfs4_opendata_to_nfs4_state at ffffffffc1503edf [nfsv4] 12 [ffffd0b50e1778c0] _nfs4_open_and_get_state at ffffffffc1504e56 [nfsv4] 13 [ffffd0b50e177978] _nfs4_do_open at ffffffffc15051b8 [nfsv4] 14 [ffffd0b50e1779f8] nfs4_do_open at ffffffffc150559c [nfsv4] 15 [ffffd0b50e177a80] nfs4_atomic_open at ffffffffc15057fb [nfsv4] 16 [ffffd0b50e177ad0] nfs4_file_open at ffffffffc15219be [nfsv4] 17 [ffffd0b50e177b78] do_dentry_open at ffffffff9c09e6ea 18 [ffffd0b50e177ba8] vfs_open at ffffffff9c0a082e 19 [ffffd0b50e177bd0] dentry_open at ffffffff9c0a0935 The issue is that the delegreturn is being asked to wait for a layout return that cannot complete because a state recovery was initiated. The state recovery cannot complete until the open() finishes processing the delegations it was given. The solution is to propagate the existing flags that indicate a non-blocking call to the function pnfs_roc(), so that it knows not to wait in this situation. (CVE-2026-23050) In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset `qfq_class->leaf_qdisc->q.qlen > 0` does not imply that the class itself is active. Two qfq_class objects may point to the same leaf_qdisc. This happens when: 1. one QFQ qdisc is attached to the dev as the root qdisc, and 2. another QFQ qdisc is temporarily referenced (e.g., via qdisc_get() / qdisc_put()) and is pending to be destroyed, as in function tc_new_tfilter. When packets are enqueued through the root QFQ qdisc, the shared leaf_qdisc->q.qlen increases. At the same time, the second QFQ qdisc triggers qdisc_put and qdisc_destroy: the qdisc enters qfq_reset() with its own q->q.qlen == 0, but its class_x27;s leaf qdisc->q.qlen > 0. Therefore, the qfq_reset would wrongly deactivate an inactive aggregate and trigger a null-deref in qfq_deactivate_agg: [ 0.903172] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 0.903571] #PF: supervisor write access in kernel mode [ 0.903860] #PF: error_code(0x0002) - not-present page [ 0.904177] PGD 10299b067 P4D 10299b067 PUD 10299c067 PMD 0 [ 0.904502] Oops: Oops: 0002 [#1] SMP NOPTI [ 0.904737] CPU: 0 UID: 0 PID: 135 Comm: exploit Not tainted 6.19.0-rc3+ #2 NONE [ 0.905157] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 0.905754] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:992 (discriminator 2) include/linux/list.h:1006 (discriminator 2) net/sched/sch_qfq.c:1367 (discriminator 2) net/sched/sch_qfq.c:1393 (discriminator 2)) [ 0.906046] Code: 0f 84 4d 01 00 00 48 89 70 18 8b 4b 10 48 c7 c2 ff ff ff ff 48 8b 78 08 48 d3 e2 48 21 f2 48 2b 13 48 8b 30 48 d3 ea 8b 4b 18 0 Code starting with the faulting instruction =========================================== 0: 0f 84 4d 01 00 00 je 0x153 6: 48 89 70 18 mov %rsi,0x18(%rax) a: 8b 4b 10 mov 0x10(%rbx),%ecx d: 48 c7 c2 ff ff ff ff mov $0xffffffffffffffff,%rdx 14: 48 8b 78 08 mov 0x8(%rax),%rdi 18: 48 d3 e2 shl %cl,%rdx 1b: 48 21 f2 and %rsi,%rdx 1e: 48 2b 13 sub (%rbx),%rdx 21: 48 8b 30 mov (%rax),%rsi 24: 48 d3 ea shr %cl,%rdx 27: 8b 4b 18 mov 0x18(%rbx),%ecx ... [ 0.907095] RSP: 0018:ffffc900004a39a0 EFLAGS: 00010246 [ 0.907368] RAX: ffff8881043a0880 RBX: ffff888102953340 RCX: 0000000000000000 [ 0.907723] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.908100] RBP: ffff888102952180 R08: 0000000000000000 R09: 0000000000000000 [ 0.908451] R10: ffff8881043a0000 R11: 0000000000000000 R12: ffff888102952000 [ 0.908804] R13: ffff888102952180 R14: ffff8881043a0ad8 R15: ffff8881043a0880 [ 0.909179] FS: 000000002a1a0380(0000) GS:ffff888196d8d000(0000) knlGS:0000000000000000 [ 0.909572] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.909857] CR2: 0000000000000000 CR3: 0000000102993002 CR4: 0000000000772ef0 [ 0.910247] PKRU: 55555554 [ 0.910391] Call Trace: [ 0.910527] <TASK> [ 0.910638] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1485) [ 0.910826] qdisc_reset (include/linux/skbuff.h:2195 include/linux/skbuff.h:2501 include/linux/skbuff.h:3424 include/linux/skbuff.h:3430 net/sched/sch_generic.c:1036) [ 0.911040] __qdisc_destroy (net/sched/sch_generic.c:1076) [ 0.911236] tc_new_tfilter (net/sched/cls_api.c:2447) [ 0.911447] rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) [ 0.911663] ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:6861) [ 0.911894] netlink_rcv_skb (net/netlink/af_netlink.c:2550) [ 0.912100] netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) [ 0.912296] ? __alloc_skb (net/core/skbuff.c:706) [ 0.912484] netlink_sendmsg (net/netlink/af ---truncated--- (CVE-2026-22976) In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd: Check event before enable to avoid GPF On AMD machines cpuc->events[idx] can become NULL in a subtle race condition with NMI->throttle->x86_pmu_stop(). Check event for NULL in amd_pmu_enable_all() before enable to avoid a GPF. This appears to be an AMD only issue. Syzkaller reported a GPF in amd_pmu_enable_all. INFO: NMI handler (perf_event_nmi_handler) took too long to run: 13.143 msecs Oops: general protection fault, probably for non-canonical address 0xdffffc0000000034: 0000 PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000001a0-0x00000000000001a7] CPU: 0 UID: 0 PID: 328415 Comm: repro_36674776 Not tainted 6.12.0-rc1-syzk RIP: 0010:x86_pmu_enable_event (arch/x86/events/perf_event.h:1195 arch/x86/events/core.c:1430) RSP: 0018:ffff888118009d60 EFLAGS: 00010012 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000034 RSI: 0000000000000000 RDI: 00000000000001a0 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88811802a440 R14: ffff88811802a240 R15: ffff8881132d8601 FS: 00007f097dfaa700(0000) GS:ffff888118000000(0000) GS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c0 CR3: 0000000103d56000 CR4: 00000000000006f0 Call Trace: <IRQ> amd_pmu_enable_all (arch/x86/events/amd/core.c:760 (discriminator 2)) x86_pmu_enable (arch/x86/events/core.c:1360) event_sched_out (kernel/events/core.c:1191 kernel/events/core.c:1186 kernel/events/core.c:2346) __perf_remove_from_context (kernel/events/core.c:2435) event_function (kernel/events/core.c:259) remote_function (kernel/events/core.c:92 (discriminator 1) kernel/events/core.c:72 (discriminator 1)) __flush_smp_call_function_queue (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/csd.h:64 kernel/smp.c:135 kernel/smp.c:540) __sysvec_call_function_single (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./arch/x86/include/asm/trace/irq_vectors.h:99 arch/x86/kernel/smp.c:272) sysvec_call_function_single (arch/x86/kernel/smp.c:266 (discriminator 47) arch/x86/kernel/smp.c:266 (discriminator 47)) </IRQ> (CVE-2025-68798) In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: dtv5100: fix out-of-bounds in dtv5100_i2c_msg() rlen value is a user-controlled value, but dtv5100_i2c_msg() does not check the size of the rlen value. Therefore, if it is set to a value larger than sizeof(st->data), an out-of-bounds vuln occurs for st->data. Therefore, we need to add proper range checking to prevent this vuln. (CVE-2025-68819) In the Linux kernel, the following vulnerability has been resolved: libceph: replace overzealous BUG_ON in osdmap_apply_incremental() If the osdmap is (maliciously) corrupted such that the incremental osdmap epoch is different from what is expected, there is no need to BUG. Instead, just declare the incremental osdmap to be invalid. (CVE-2026-22990) In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1 When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in response to a guest WRMSR, clear XFD-disabled features in the saved (or to be restored) XSTATE_BV to ensure KVM doesn_x27;t attempt to load state for features that are disabled via the guest_x27;s XFD. Because the kernel executes XRSTOR with the guest_x27;s XFD, saving XSTATE_BV[i]=1 with XFD[i]=1 will cause XRSTOR to #NM and panic the kernel. E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848 Modules linked in: kvm_intel kvm irqbypass CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 switch_fpu_return+0x4a/0xb0 kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1, and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler_x27;s call to fpu_update_guest_xfd(). and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867 Modules linked in: kvm_intel kvm irqbypass CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 fpu_swap_kvm_fpstate+0x6b/0x120 kvm_load_guest_fpu+0x30/0x80 [kvm] kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The new behavior is consistent with the AMX architecture. Per Intel_x27;s SDM, XSAVE saves XSTATE_BV as _x27;0_x27; for components that are disabled via XFD (and non-compacted XSAVE saves the initial configuration of the state component): If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i, the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1; instead, it operates as if XINUSE[i] = 0 (and the state component was in its initial state): it saves bit i of XSTATE_BV field of the XSAVE header as 0; in addition, XSAVE saves the initial configuration of the state component (the other instructions do not save state component i). Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using a constant XFD based on the set of enabled features when XSAVEing for a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled features can only happen in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, because fpu_swap_kvm_fpstate()_x27;s call to save_fpregs_to_fpstate() saves the outgoing FPU state with the current XFD; and that is (on all but the first WRMSR to XFD) the guest XFD. Therefore, XFD can only go out of sync with XSTATE_BV in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, and it we can consider it (de facto) part of KVM ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features. [Move clea ---truncated--- (CVE-2026-23005) In the Linux kernel, the following vulnerability has been resolved: io_uring: fix filename leak in __io_openat_prep() __io_openat_prep() allocates a struct filename using getname(). However, for the condition of the file being installed in the fixed file table as well as having O_CLOEXEC flag set, the function returns early. At that point, the request doesn_x27;t have REQ_F_NEED_CLEANUP flag set. Due to this, the memory for the newly allocated struct filename is not cleaned up, causing a memory leak. Fix this by setting the REQ_F_NEED_CLEANUP for the request just after the successful getname() call, so that when the request is torn down, the filename will be cleaned up, along with other resources needing cleanup. (CVE-2025-68814) In the Linux kernel, the following vulnerability has been resolved: e1000: fix OOB in e1000_tbi_should_accept() In e1000_tbi_should_accept() we read the last byte of the frame via _x27;data[length - 1]_x27; to evaluate the TBI workaround. If the descriptor- reported length is zero or larger than the actual RX buffer size, this read goes out of bounds and can hit unrelated slab objects. The issue is observed from the NAPI receive path (e1000_clean_rx_irq): ================================================================== BUG: KASAN: slab-out-of-bounds in e1000_tbi_should_accept+0x610/0x790 Read of size 1 at addr ffff888014114e54 by task sshd/363 CPU: 0 PID: 363 Comm: sshd Not tainted 5.18.0-rc1 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x5a/0x74 print_address_description+0x7b/0x440 print_report+0x101/0x200 kasan_report+0xc1/0xf0 e1000_tbi_should_accept+0x610/0x790 e1000_clean_rx_irq+0xa8c/0x1110 e1000_clean+0xde2/0x3c10 __napi_poll+0x98/0x380 net_rx_action+0x491/0xa20 __do_softirq+0x2c9/0x61d do_softirq+0xd1/0x120 </IRQ> <TASK> __local_bh_enable_ip+0xfe/0x130 ip_finish_output2+0x7d5/0xb00 __ip_queue_xmit+0xe24/0x1ab0 __tcp_transmit_skb+0x1bcb/0x3340 tcp_write_xmit+0x175d/0x6bd0 __tcp_push_pending_frames+0x7b/0x280 tcp_sendmsg_locked+0x2e4f/0x32d0 tcp_sendmsg+0x24/0x40 sock_write_iter+0x322/0x430 vfs_write+0x56c/0xa60 ksys_write+0xd1/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f511b476b10 Code: 73 01 c3 48 8b 0d 88 d3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 2b 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 8e 9b 01 00 48 89 04 24 RSP: 002b:00007ffc9211d4e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000004024 RCX: 00007f511b476b10 RDX: 0000000000004024 RSI: 0000559a9385962c RDI: 0000000000000003 RBP: 0000559a9383a400 R08: fffffffffffffff0 R09: 0000000000004f00 R10: 0000000000000070 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc9211d57f R14: 0000559a9347bde7 R15: 0000000000000003 </TASK> Allocated by task 1: __kasan_krealloc+0x131/0x1c0 krealloc+0x90/0xc0 add_sysfs_param+0xcb/0x8a0 kernel_add_sysfs_param+0x81/0xd4 param_sysfs_builtin+0x138/0x1a6 param_sysfs_init+0x57/0x5b do_one_initcall+0x104/0x250 do_initcall_level+0x102/0x132 do_initcalls+0x46/0x74 kernel_init_freeable+0x28f/0x393 kernel_init+0x14/0x1a0 ret_from_fork+0x22/0x30 The buggy address belongs to the object at ffff888014114000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1620 bytes to the right of 2048-byte region [ffff888014114000, ffff888014114800] The buggy address belongs to the physical page: page:ffffea0000504400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14110 head:ffffea0000504400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head|node=0|zone=1) raw: 0100000000010200 0000000000000000 dead000000000001 ffff888013442000 raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected ================================================================== This happens because the TBI check unconditionally dereferences the last byte without validating the reported length first: u8 last_byte = *(data + length - 1); Fix by rejecting the frame early if the length is zero, or if it exceeds adapter->rx_buffer_len. This preserves the TBI workaround semantics for valid frames and prevents touching memory beyond the RX buffer. (CVE-2025-71093) In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Check for the presence of LS_NLA_TYPE_DGID correctly The netlink response for RDMA_NL_LS_OP_IP_RESOLVE should always have a LS_NLA_TYPE_DGID attribute, it is invalid if it does not. Use the nl parsing logic properly and call nla_parse_deprecated() to fill the nlattrs array and then directly index that array to get the data for the DGID. Just fail if it is NULL. Remove the for loop searching for the nla, and squash the validation and parsing into one function. Fixes an uninitialized read from the stack triggered by userspace if it does not provide the DGID to a kernel initiated RDMA_NL_LS_OP_IP_RESOLVE query. BUG: KMSAN: uninit-value in hex_byte_pack include/linux/hex.h:13 [inline] BUG: KMSAN: uninit-value in ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490 hex_byte_pack include/linux/hex.h:13 [inline] ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490 ip6_addr_string+0x18a/0x3e0 lib/vsprintf.c:1509 ip_addr_string+0x245/0xee0 lib/vsprintf.c:1633 pointer+0xc09/0x1bd0 lib/vsprintf.c:2542 vsnprintf+0xf8a/0x1bd0 lib/vsprintf.c:2930 vprintk_store+0x3ae/0x1530 kernel/printk/printk.c:2279 vprintk_emit+0x307/0xcd0 kernel/printk/printk.c:2426 vprintk_default+0x3f/0x50 kernel/printk/printk.c:2465 vprintk+0x36/0x50 kernel/printk/printk_safe.c:82 _printk+0x17e/0x1b0 kernel/printk/printk.c:2475 ib_nl_process_good_ip_rsep drivers/infiniband/core/addr.c:128 [inline] ib_nl_handle_ip_res_resp+0x963/0x9d0 drivers/infiniband/core/addr.c:141 rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:-1 [inline] rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0xefa/0x11c0 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0xf04/0x12b0 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x10b3/0x1250 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x333/0x3d0 net/socket.c:729 ____sys_sendmsg+0x7e0/0xd80 net/socket.c:2617 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2671 __sys_sendmsg+0x1aa/0x300 net/socket.c:2703 __compat_sys_sendmsg net/compat.c:346 [inline] __do_compat_sys_sendmsg net/compat.c:353 [inline] __se_compat_sys_sendmsg net/compat.c:350 [inline] __ia32_compat_sys_sendmsg+0xa4/0x100 net/compat.c:350 ia32_sys_call+0x3f6c/0x4310 arch/x86/include/generated/asm/syscalls_32.h:371 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0xb0/0x150 arch/x86/entry/syscall_32.c:306 do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:3 (CVE-2025-71096) In the Linux kernel, the following vulnerability has been resolved: ipvs: fix ipv4 null-ptr-deref in route error path The IPv4 code path in __ip_vs_get_out_rt() calls dst_link_failure() without ensuring skb->dev is set, leading to a NULL pointer dereference in fib_compute_spec_dst() when ipv4_link_failure() attempts to send ICMP destination unreachable messages. The issue emerged after commit ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") started calling __ip_options_compile() from ipv4_link_failure(). This code path eventually calls fib_compute_spec_dst() which dereferences skb->dev. An attempt was made to fix the NULL skb->dev dereference in commit 0113d9c9d1cc ("ipv4: fix null-deref in ipv4_link_failure"), but it only addressed the immediate dev_net(skb->dev) dereference by using a fallback device. The fix was incomplete because fib_compute_spec_dst() later in the call chain still accesses skb->dev directly, which remains NULL when IPVS calls dst_link_failure(). The crash occurs when: 1. IPVS processes a packet in NAT mode with a misconfigured destination 2. Route lookup fails in __ip_vs_get_out_rt() before establishing a route 3. The error path calls dst_link_failure(skb) with skb->dev == NULL 4. ipv4_link_failure() -> ipv4_send_dest_unreach() -> __ip_options_compile() -> fib_compute_spec_dst() 5. fib_compute_spec_dst() dereferences NULL skb->dev Apply the same fix used for IPv6 in commit 326bf17ea5d4 ("ipvs: fix ipv6 route unreach panic"): set skb->dev from skb_dst(skb)->dev before calling dst_link_failure(). KASAN: null-ptr-deref in range [0x0000000000000328-0x000000000000032f] CPU: 1 PID: 12732 Comm: syz.1.3469 Not tainted 6.6.114 #2 RIP: 0010:__in_dev_get_rcu include/linux/inetdevice.h:233 RIP: 0010:fib_compute_spec_dst+0x17a/0x9f0 net/ipv4/fib_frontend.c:285 Call Trace: <TASK> spec_dst_fill net/ipv4/ip_options.c:232 spec_dst_fill net/ipv4/ip_options.c:229 __ip_options_compile+0x13a1/0x17d0 net/ipv4/ip_options.c:330 ipv4_send_dest_unreach net/ipv4/route.c:1252 ipv4_link_failure+0x702/0xb80 net/ipv4/route.c:1265 dst_link_failure include/net/dst.h:437 __ip_vs_get_out_rt+0x15fd/0x19e0 net/netfilter/ipvs/ip_vs_xmit.c:412 ip_vs_nat_xmit+0x1d8/0xc80 net/netfilter/ipvs/ip_vs_xmit.c:764 (CVE-2025-68813) In the Linux kernel, the following vulnerability has been resolved: migrate: correct lock ordering for hugetlb file folios Syzbot has found a deadlock (analyzed by Lance Yang): 1) Task (5749): Holds folio_lock, then tries to acquire i_mmap_rwsem(read lock). 2) Task (5754): Holds i_mmap_rwsem(write lock), then tries to acquire folio_lock. migrate_pages() -> migrate_hugetlbs() -> unmap_and_move_huge_page() <- Takes folio_lock! -> remove_migration_ptes() -> __rmap_walk_file() -> i_mmap_lock_read() <- Waits for i_mmap_rwsem(read lock)! hugetlbfs_fallocate() -> hugetlbfs_punch_hole() <- Takes i_mmap_rwsem(write lock)! -> hugetlbfs_zero_partial_page() -> filemap_lock_hugetlb_folio() -> filemap_lock_folio() -> __filemap_get_folio <- Waits for folio_lock! The migration path is the one taking locks in the wrong order according to the documentation at the top of mm/rmap.c. So expand the scope of the existing i_mmap_lock to cover the calls to remove_migration_ptes() too. This is (mostly) how it used to be after commit c0d0381ade79. That was removed by 336bf30eb765 for both file & anon hugetlb pages when it should only have been removed for anon hugetlb pages. (CVE-2026-23097) In the Linux kernel, the following vulnerability has been resolved: libceph: make free_choose_arg_map() resilient to partial allocation free_choose_arg_map() may dereference a NULL pointer if its caller fails after a partial allocation. For example, in decode_choose_args(), if allocation of arg_map->args fails, execution jumps to the fail label and free_choose_arg_map() is called. Since arg_map->size is updated to a non-zero value before memory allocation, free_choose_arg_map() will iterate over arg_map->args and dereference a NULL pointer. To prevent this potential NULL pointer dereference and make free_choose_arg_map() more resilient, add checks for pointers before iterating. (CVE-2026-22991) In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init blk-iocost sometimes causes the following crash: BUG: kernel NULL pointer dereference, address: 00000000000000e0 ... RIP: 0010:_raw_spin_lock+0x17/0x30 Code: be 01 02 00 00 e8 79 38 39 ff 31 d2 89 d0 5d c3 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 65 ff 05 48 d0 34 7e b9 01 00 00 00 31 c0 <f0> 0f b1 0f 75 02 5d c3 89 c6 e8 ea 04 00 00 5d c3 0f 1f 84 00 00 RSP: 0018:ffffc900023b3d40 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 00000000000000e0 RCX: 0000000000000001 RDX: ffffc900023b3d20 RSI: ffffc900023b3cf0 RDI: 00000000000000e0 RBP: ffffc900023b3d40 R08: ffffc900023b3c10 R09: 0000000000000003 R10: 0000000000000064 R11: 000000000000000a R12: ffff888102337000 R13: fffffffffffffff2 R14: ffff88810af408c8 R15: ffff8881070c3600 FS: 00007faaaf364fc0(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 00000001097b1000 CR4: 0000000000350ea0 Call Trace: <TASK> ioc_weight_write+0x13d/0x410 cgroup_file_write+0x7a/0x130 kernfs_fop_write_iter+0xf5/0x170 vfs_write+0x298/0x370 ksys_write+0x5f/0xb0 __x64_sys_write+0x1b/0x20 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This happens because iocg->ioc is NULL. The field is initialized by ioc_pd_init() and never cleared. The NULL deref is caused by blkcg_activate_policy() installing blkg_policy_data before initializing it. blkcg_activate_policy() was doing the following: 1. Allocate pd_x27;s for all existing blkg_x27;s and install them in blkg->pd[]. 2. Initialize all pd_x27;s. 3. Online all pd_x27;s. blkcg_activate_policy() only grabs the queue_lock and may release and re-acquire the lock as allocation may need to sleep. ioc_weight_write() grabs blkcg->lock and iterates all its blkg_x27;s. The two can race and if ioc_weight_write() runs during #1 or between #1 and #2, it can encounter a pd which is not initialized yet, leading to crash. The crash can be reproduced with the following script: #!/bin/bash echo +io > /sys/fs/cgroup/cgroup.subtree_control systemd-run --unit touch-sda --scope dd if=/dev/sda of=/dev/null bs=1M count=1 iflag=direct echo 100 > /sys/fs/cgroup/system.slice/io.weight bash -c "echo _x27;8:0 enable=1_x27; > /sys/fs/cgroup/io.cost.qos" & sleep .2 echo 100 > /sys/fs/cgroup/system.slice/io.weight with the following patch applied: > diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c > index fc49be622e05..38d671d5e10c 100644 > --- a/block/blk-cgroup.c > +++ b/block/blk-cgroup.c > @@ -1553,6 +1553,12 @@ int blkcg_activate_policy(struct gendisk *disk, const struct blkcg_policy *pol) > pd->online = false; > } > > + if (system_state == SYSTEM_RUNNING) { > + spin_unlock_irq(&q->queue_lock); > + ssleep(1); > + spin_lock_irq(&q->queue_lock); > + } > + > /* all allocated, init in the same order */ > if (pol->pd_init_fn) > list_for_each_entry_reverse(blkg, &q->blkg_list, q_node) I don_x27;t see a reason why all pd_x27;s should be allocated, initialized and onlined together. The only ordering requirement is that parent blkgs to be initialized and onlined before children, which is guaranteed from the walking order. Let_x27;s fix the bug by allocating, initializing and onlining pd for each blkg and holding blkcg->lock over initialization and onlining. This ensures that an installed blkg is always fully initialized and onlined removing the the race window. (CVE-2023-54271) In the Linux kernel, the following vulnerability has been resolved: NFSD: NFSv4 file creation neglects setting ACL An NFSv4 client that sets an ACL with a named principal during file creation retrieves the ACL afterwards, and finds that it is only a default ACL (based on the mode bits) and not the ACL that was requested during file creation. This violates RFC 8881 section 6.4.1.3: "the ACL attribute is set as given". The issue occurs in nfsd_create_setattr(), which calls nfsd_attrs_valid() to determine whether to call nfsd_setattr(). However, nfsd_attrs_valid() checks only for iattr changes and security labels, but not POSIX ACLs. When only an ACL is present, the function returns false, nfsd_setattr() is skipped, and the POSIX ACL is never applied to the inode. Subsequently, when the client retrieves the ACL, the server finds no POSIX ACL on the inode and returns one generated from the file_x27;s mode bits rather than returning the originally-specified ACL. (CVE-2025-68803) In the Linux kernel, the following vulnerability has been resolved: Input: alps - fix use-after-free bugs caused by dev3_register_work The dev3_register_work delayed work item is initialized within alps_reconnect() and scheduled upon receipt of the first bare PS/2 packet from an external PS/2 device connected to the ALPS touchpad. During device detachment, the original implementation calls flush_workqueue() in psmouse_disconnect() to ensure completion of dev3_register_work. However, the flush_workqueue() in psmouse_disconnect() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that after flush_workqueue() has finished executing, the dev3_register_work could still be scheduled. Although the psmouse state is set to PSMOUSE_CMD_MODE in psmouse_disconnect(), the scheduling of dev3_register_work remains unaffected. The race condition can occur as follows: CPU 0 (cleanup path) | CPU 1 (delayed work) psmouse_disconnect() | psmouse_set_state() | flush_workqueue() | alps_report_bare_ps2_packet() alps_disconnect() | psmouse_queue_work() kfree(priv); // FREE | alps_register_bare_ps2_mouse() | priv = container_of(work...); // USE | priv->dev3 // USE Add disable_delayed_work_sync() in alps_disconnect() to ensure that dev3_register_work is properly canceled and prevented from executing after the alps_data structure has been deallocated. This bug is identified by static analysis. (CVE-2025-68822) In the Linux kernel, the following vulnerability has been resolved: ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr() There exists a kernel oops caused by a BUG_ON(nhead < 0) at net/core/skbuff.c:2232 in pskb_expand_head(). This bug is triggered as part of the calipso_skbuff_setattr() routine when skb_cow() is passed headroom > INT_MAX (i.e. (int)(skb_headroom(skb) + len_delta) < 0). The root cause of the bug is due to an implicit integer cast in __skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensure that delta = headroom - skb_headroom(skb) is never negative, otherwise we will trigger a BUG_ON in pskb_expand_head(). However, if headroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, delta becomes negative, and pskb_expand_head() is passed a negative value for nhead. Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing "negative" headroom sizes to skb_cow() within calipso_skbuff_setattr() by only using skb_cow() to grow headroom. PoC: Using `netlabelctl` tool: netlabelctl map del default netlabelctl calipso add pass doi:7 netlabelctl map add default address:0::1/128 protocol:calipso,7 Then run the following PoC: int fd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP); // setup msghdr int cmsg_size = 2; int cmsg_len = 0x60; struct msghdr msg; struct sockaddr_in6 dest_addr; struct cmsghdr * cmsg = (struct cmsghdr *) calloc(1, sizeof(struct cmsghdr) + cmsg_len); msg.msg_name = &dest_addr; msg.msg_namelen = sizeof(dest_addr); msg.msg_iov = NULL; msg.msg_iovlen = 0; msg.msg_control = cmsg; msg.msg_controllen = cmsg_len; msg.msg_flags = 0; // setup sockaddr dest_addr.sin6_family = AF_INET6; dest_addr.sin6_port = htons(31337); dest_addr.sin6_flowinfo = htonl(31337); dest_addr.sin6_addr = in6addr_loopback; dest_addr.sin6_scope_id = 31337; // setup cmsghdr cmsg->cmsg_len = cmsg_len; cmsg->cmsg_level = IPPROTO_IPV6; cmsg->cmsg_type = IPV6_HOPOPTS; char * hop_hdr = (char *)cmsg + sizeof(struct cmsghdr); hop_hdr[1] = 0x9; //set hop size - (0x9 + 1) * 8 = 80 sendmsg(fd, &msg, 0); (CVE-2025-71085) In the Linux kernel, the following vulnerability has been resolved: ethtool: Avoid overflowing userspace buffer on stats query The ethtool -S command operates across three ioctl calls: ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and ETHTOOL_GSTATS for the values. If the number of stats changes between these calls (e.g., due to device reconfiguration), userspace_x27;s buffer allocation will be incorrect, potentially leading to buffer overflow. Drivers are generally expected to maintain stable stat counts, but some drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making this scenario possible. Some drivers try to handle this internally: - bnad_get_ethtool_stats() returns early in case stats.n_stats is not equal to the driver_x27;s stats count. - micrel/ksz884x also makes sure not to write anything beyond stats.n_stats and overflow the buffer. However, both use stats.n_stats which is already assigned with the value returned from get_sset_count(), hence won_x27;t solve the issue described here. Change ethtool_get_strings(), ethtool_get_stats(), ethtool_get_phy_stats() to not return anything in case of a mismatch between userspace_x27;s size and get_sset_size(), to prevent buffer overflow. The returned n_stats value will be equal to zero, to reflect that nothing has been returned. This could result in one of two cases when using upstream ethtool, depending on when the size change is detected: 1. When detected in ethtool_get_strings(): # ethtool -S eth2 no stats available 2. When detected in get stats, all stats will be reported as zero. Both cases are presumably transient, and a subsequent ethtool call should succeed. Other than the overflow avoidance, these two cases are very evident (no output/cleared stats), which is arguably better than presenting incorrect/shifted stats. I also considered returning an error instead of a "silent" response, but that seems more destructive towards userspace apps. Notes: - This patch does not claim to fix the inherent race, it only makes sure that we do not overflow the userspace buffer, and makes for a more predictable behavior. - RTNL lock is held during each ioctl, the race window exists between the separate ioctl calls when the lock is released. - Userspace ethtool always fills stats.n_stats, but it is likely that these stats ioctls are implemented in other userspace applications which might not fill it. The added code checks that it_x27;s not zero, to prevent any regressions. (CVE-2025-68795) In the Linux kernel, the following vulnerability has been resolved: libceph: make decode_pool() more resilient against corrupted osdmaps If the osdmap is (maliciously) corrupted such that the encoded length of ceph_pg_pool envelope is less than what is expected for a particular encoding version, out-of-bounds reads may ensue because the only bounds check that is there is based on that length value. This patch adds explicit bounds checks for each field that is decoded or skipped. (CVE-2025-71116) In the Linux kernel, the following vulnerability has been resolved: fsnotify: do not generate ACCESS/MODIFY events on child for special files inotify/fanotify do not allow users with no read access to a file to subscribe to events (e.g. IN_ACCESS/IN_MODIFY), but they do allow the same user to subscribe for watching events on children when the user has access to the parent directory (e.g. /dev). Users with no read access to a file but with read access to its parent directory can still stat the file and see if it was accessed/modified via atime/mtime change. The same is not true for special files (e.g. /dev/null). Users will not generally observe atime/mtime changes when other users read/write to special files, only when someone sets atime/mtime via utimensat(). Align fsnotify events with this stat behavior and do not generate ACCESS/MODIFY events to parent watchers on read/write of special files. The events are still generated to parent watchers on utimensat(). This closes some side-channels that could be possibly used for information exfiltration [1]. [1] https://snee.la/pdf/pubs/file-notification-attacks.pdf (CVE-2025-68788) In the Linux kernel, the following vulnerability has been resolved: scsi: core: Wake up the error handler when final completions race against each other The fragile ordering between marking commands completed or failed so that the error handler only wakes when the last running command completes or times out has race conditions. These race conditions can cause the SCSI layer to fail to wake the error handler, leaving I/O through the SCSI host stuck as the error state cannot advance. First, there is an memory ordering issue within scsi_dec_host_busy(). The write which clears SCMD_STATE_INFLIGHT may be reordered with reads counting in scsi_host_busy(). While the local CPU will see its own write, reordering can allow other CPUs in scsi_dec_host_busy() or scsi_eh_inc_host_failed() to see a raised busy count, causing no CPU to see a host busy equal to the host_failed count. This race condition can be prevented with a memory barrier on the error path to force the write to be visible before counting host busy commands. Second, there is a general ordering issue with scsi_eh_inc_host_failed(). By counting busy commands before incrementing host_failed, it can race with a final command in scsi_dec_host_busy(), such that scsi_dec_host_busy() does not see host_failed incremented but scsi_eh_inc_host_failed() counts busy commands before SCMD_STATE_INFLIGHT is cleared by scsi_dec_host_busy(), resulting in neither waking the error handler task. This needs the call to scsi_host_busy() to be moved after host_failed is incremented to close the race condition. (CVE-2026-23110) In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Handle incorrect num_connectors capability The UCSI spec states that the num_connectors field is 7 bits, and the 8th bit is reserved and should be set to zero. Some buggy FW has been known to set this bit, and it can lead to a system not booting. Flag that the FW is not behaving correctly, and auto-fix the value so that the system boots correctly. Found on Lenovo P1 G8 during Linux enablement program. The FW will be fixed, but seemed worth addressing in case it hit platforms that aren_x27;t officially Linux supported. (CVE-2025-71108) In the Linux kernel, the following vulnerability has been resolved: nbd: defer config put in recv_work There is one uaf issue in recv_work when running NBD_CLEAR_SOCK and NBD_CMD_RECONFIGURE: nbd_genl_connect // conf_ref=2 (connect and recv_work A) nbd_open // conf_ref=3 recv_work A done // conf_ref=2 NBD_CLEAR_SOCK // conf_ref=1 nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B) close nbd // conf_ref=1 recv_work B config_put // conf_ref=0 atomic_dec(&config->recv_threads); -> UAF Or only running NBD_CLEAR_SOCK: nbd_genl_connect // conf_ref=2 nbd_open // conf_ref=3 NBD_CLEAR_SOCK // conf_ref=2 close nbd nbd_release config_put // conf_ref=1 recv_work config_put // conf_ref=0 atomic_dec(&config->recv_threads); -> UAF Commit 87aac3a80af5 ("nbd: call nbd_config_put() before notifying the waiter") moved nbd_config_put() to run before waking up the waiter in recv_work, in order to ensure that nbd_start_device_ioctl() would not be woken up while nbd->task_recv was still uncleared. However, in nbd_start_device_ioctl(), after being woken up it explicitly calls flush_workqueue() to make sure all current works are finished. Therefore, there is no need to move the config put ahead of the wakeup. Move nbd_config_put() to the end of recv_work, so that the reference is held for the whole lifetime of the worker thread. This makes sure the config cannot be freed while recv_work is still running, even if clear + reconfigure interleave. In addition, we don_x27;t need to worry about recv_work dropping the last nbd_put (which causes deadlock): path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT): connect // nbd_refs=1 (trigger recv_work) open nbd // nbd_refs=2 NBD_CLEAR_SOCK close nbd nbd_release nbd_disconnect_and_put flush_workqueue // recv_work done nbd_config_put nbd_put // nbd_refs=1 nbd_put // nbd_refs=0 queue_work path B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT): connect // nbd_refs=2 (trigger recv_work) open nbd // nbd_refs=3 NBD_CLEAR_SOCK // conf_refs=2 close nbd nbd_release nbd_config_put // conf_refs=1 nbd_put // nbd_refs=2 recv_work done // conf_refs=0, nbd_refs=1 rmmod // nbd_refs=0 Depends-on: e2daec488c57 ("nbd: Fix hungtask when nbd_config_put") (CVE-2025-68372) In the Linux kernel, the following vulnerability has been resolved: wifi: avoid kernel-infoleak from struct iw_point struct iw_point has a 32bit hole on 64bit arches. struct iw_point { void __user *pointer; /* Pointer to the data (in user space) */ __u16 length; /* number of fields or size in bytes */ __u16 flags; /* Optional params */ }; Make sure to zero the structure to avoid disclosing 32bits of kernel data to user space. (CVE-2026-22978) In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path" This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9. The commit being reverted added code to __qla2x00_abort_all_cmds() to call sp->done() without holding a spinlock. But unlike the older code below it, this new code failed to check sp->cmd_type and just assumed TYPE_SRB, which results in a jump to an invalid pointer in target-mode with TYPE_TGT_CMD: qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success 0000000009f7a79b qla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h. qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no buffer qla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event 0x8002 occurred qla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery - ha=0000000058183fda. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor instruction fetch in kernel mode PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G O 6.1.133 #1 Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206 RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000 RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0 RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045 R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40 R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400 FS: 0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x4d/0x8b ? page_fault_oops+0x91/0x180 ? trace_buffer_unlock_commit_regs+0x38/0x1a0 ? exc_page_fault+0x391/0x5e0 ? asm_exc_page_fault+0x22/0x30 __qla2x00_abort_all_cmds+0xcb/0x3e0 [qla2xxx_scst] qla2x00_abort_all_cmds+0x50/0x70 [qla2xxx_scst] qla2x00_abort_isp_cleanup+0x3b7/0x4b0 [qla2xxx_scst] qla2x00_abort_isp+0xfd/0x860 [qla2xxx_scst] qla2x00_do_dpc+0x581/0xa40 [qla2xxx_scst] kthread+0xa8/0xd0 </TASK> Then commit 4475afa2646d ("scsi: qla2xxx: Complete command early within lock") added the spinlock back, because not having the lock caused a race and a crash. But qla2x00_abort_srb() in the switch below already checks for qla2x00_chip_is_down() and handles it the same way, so the code above the switch is now redundant and still buggy in target-mode. Remove it. (CVE-2025-68818) In the Linux kernel, the following vulnerability has been resolved: nfsd: provide locking for v4_end_grace Writing to v4_end_grace can race with server shutdown and result in memory being accessed after it was freed - reclaim_str_hashtbl in particularly. We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is held while client_tracking_op->init() is called and that can wait for an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a deadlock. nfsd4_end_grace() is also called by the landromat work queue and this doesn_x27;t require locking as server shutdown will stop the work and wait for it before freeing anything that nfsd4_end_grace() might access. However, we must be sure that writing to v4_end_grace doesn_x27;t restart the work item after shutdown has already waited for it. For this we add a new flag protected with nn->client_lock. It is set only while it is safe to make client tracking calls, and v4_end_grace only schedules work while the flag is set with the spinlock held. So this patch adds a nfsd_net field "client_tracking_active" which is set as described. Another field "grace_end_forced", is set when v4_end_grace is written. After this is set, and providing client_tracking_active is set, the laundromat is scheduled. This "grace_end_forced" field bypasses other checks for whether the grace period has finished. This resolves a race which can result in use-after-free. (CVE-2026-22980) In the Linux kernel, the following vulnerability has been resolved: tpm: Cap the number of PCR banks tpm2_get_pcr_allocation() does not cap any upper limit for the number of banks. Cap the limit to eight banks so that out of bounds values coming from external I/O cause on only limited harm. (CVE-2025-71077) In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix tags leak when shrink nr_hw_queues Although we don_x27;t need to realloc set->tags[] when shrink nr_hw_queues, we need to free them. Or these tags will be leaked. How to reproduce: 1. mount -t configfs configfs /mnt 2. modprobe null_blk nr_devices=0 submit_queues=8 3. mkdir /mnt/nullb/nullb0 4. echo 1 > /mnt/nullb/nullb0/power 5. echo 4 > /mnt/nullb/nullb0/submit_queues 6. rmdir /mnt/nullb/nullb0 In step 4, will alloc 9 tags (8 submit queues and 1 poll queue), then in step 5, new_nr_hw_queues = 5 (4 submit queues and 1 poll queue). At last in step 6, only these 5 tags are freed, the other 4 tags leaked. (CVE-2023-54227) In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix reference count leak when using error routes with nexthop objects When a nexthop object is deleted, it is marked as dead and then fib_table_flush() is called to flush all the routes that are using the dead nexthop. The current logic in fib_table_flush() is to only flush error routes (e.g., blackhole) when it is called as part of network namespace dismantle (i.e., with flush_all=true). Therefore, error routes are not flushed when their nexthop object is deleted: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip route add 198.51.100.1/32 nhid 1 # ip route add blackhole 198.51.100.2/32 nhid 1 # ip nexthop del id 1 # ip route show blackhole 198.51.100.2 nhid 1 dev dummy1 As such, they keep holding a reference on the nexthop object which in turn holds a reference on the nexthop device, resulting in a reference count leak: # ip link del dev dummy1 [ 70.516258] unregister_netdevice: waiting for dummy1 to become free. Usage count = 2 Fix by flushing error routes when their nexthop is marked as dead. IPv6 does not suffer from this problem. (CVE-2025-71097) In the Linux kernel, the following vulnerability has been resolved: uacce: fix cdev handling in the cleanup path When cdev_device_add fails, it internally releases the cdev memory, and if cdev_device_del is then executed, it will cause a hang error. To fix it, we check the return value of cdev_device_add() and clear uacce->cdev to avoid calling cdev_device_del in the uacce_remove. (CVE-2026-23096) In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: fix memory leak in update_eth_regs_async() When asynchronously writing to the device registers and if usb_submit_urb() fail, the code fail to release allocated to this point resources. (CVE-2026-23021) In the Linux kernel, the following vulnerability has been resolved: SUNRPC: svcauth_gss: avoid NULL deref on zero length gss_token in gss_read_proxy_verf A zero length gss_token results in pages == 0 and in_token->pages[0] is NULL. The code unconditionally evaluates page_address(in_token->pages[0]) for the initial memcpy, which can dereference NULL even when the copy length is 0. Guard the first memcpy so it only runs when length > 0. (CVE-2025-71120) In the Linux kernel, the following vulnerability has been resolved: ipv4: ip_gre: make ipgre_header() robust Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust") Over the years, syzbot found many ways to crash the kernel in ipgre_header() [1]. This involves team or bonding drivers ability to dynamically change their dev->needed_headroom and/or dev->hard_header_len In this particular crash mld_newpack() allocated an skb with a too small reserve/headroom, and by the time mld_sendpack() was called, syzbot managed to attach an ipgre device. [1] skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0 kernel BUG at net/core/skbuff.c:213 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213 Call Trace: <TASK> skb_under_panic net/core/skbuff.c:223 [inline] skb_push+0xc3/0xe0 net/core/skbuff.c:2641 ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897 dev_hard_header include/linux/netdevice.h:3436 [inline] neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 (CVE-2026-23011) In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/kms/nv50-: init hpd_irq_lock for PIOR DP Fixes OOPS on boards with ANX9805 DP encoders. (CVE-2023-54263) In the Linux kernel, the following vulnerability has been resolved: ip6_gre: make ip6gre_header() robust Over the years, syzbot found many ways to crash the kernel in ip6gre_header() [1]. This involves team or bonding drivers ability to dynamically change their dev->needed_headroom and/or dev->hard_header_len In this particular crash mld_newpack() allocated an skb with a too small reserve/headroom, and by the time mld_sendpack() was called, syzbot managed to attach an ip6gre device. [1] skbuff: skb_under_panic: text:ffffffff8a1d69a8 len:136 put:40 head:ffff888059bc7000 data:ffff888059bc6fe8 tail:0x70 end:0x6c0 dev:team0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:213 ! <TASK> skb_under_panic net/core/skbuff.c:223 [inline] skb_push+0xc3/0xe0 net/core/skbuff.c:2641 ip6gre_header+0xc8/0x790 net/ipv6/ip6_gre.c:1371 dev_hard_header include/linux/netdevice.h:3436 [inline] neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618 neigh_output include/net/neighbour.h:556 [inline] ip6_finish_output2+0xfb3/0x1480 net/ipv6/ip6_output.c:136 __ip6_finish_output net/ipv6/ip6_output.c:-1 [inline] ip6_finish_output+0x234/0x7d0 net/ipv6/ip6_output.c:220 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 (CVE-2025-71098) In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix middle attribute validation in push_nsh() action The push_nsh() action structure looks like this: OVS_ACTION_ATTR_PUSH_NSH(OVS_KEY_ATTR_NSH(OVS_NSH_KEY_ATTR_BASE,...)) The outermost OVS_ACTION_ATTR_PUSH_NSH attribute is OK_x27;ed by the nla_for_each_nested() inside __ovs_nla_copy_actions(). The innermost OVS_NSH_KEY_ATTR_BASE/MD1/MD2 are OK_x27;ed by the nla_for_each_nested() inside nsh_key_put_from_nlattr(). But nothing checks if the attribute in the middle is OK. We don_x27;t even check that this attribute is the OVS_KEY_ATTR_NSH. We just do a double unwrap with a pair of nla_data() calls - first time directly while calling validate_push_nsh() and the second time as part of the nla_for_each_nested() macro, which isn_x27;t safe, potentially causing invalid memory access if the size of this attribute is incorrect. The failure may not be noticed during validation due to larger netlink buffer, but cause trouble later during action execution where the buffer is allocated exactly to the size: BUG: KASAN: slab-out-of-bounds in nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch] Read of size 184 at addr ffff88816459a634 by task a.out/22624 CPU: 8 UID: 0 PID: 22624 6.18.0-rc7+ #115 PREEMPT(voluntary) Call Trace: <TASK> dump_stack_lvl+0x51/0x70 print_address_description.constprop.0+0x2c/0x390 kasan_report+0xdd/0x110 kasan_check_range+0x35/0x1b0 __asan_memcpy+0x20/0x60 nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch] push_nsh+0x82/0x120 [openvswitch] do_execute_actions+0x1405/0x2840 [openvswitch] ovs_execute_actions+0xd5/0x3b0 [openvswitch] ovs_packet_cmd_execute+0x949/0xdb0 [openvswitch] genl_family_rcv_msg_doit+0x1d6/0x2b0 genl_family_rcv_msg+0x336/0x580 genl_rcv_msg+0x9f/0x130 netlink_rcv_skb+0x11f/0x370 genl_rcv+0x24/0x40 netlink_unicast+0x73e/0xaa0 netlink_sendmsg+0x744/0xbf0 __sys_sendto+0x3d6/0x450 do_syscall_64+0x79/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Let_x27;s add some checks that the attribute is properly sized and it_x27;s the only one attribute inside the action. Technically, there is no real reason for OVS_KEY_ATTR_NSH to be there, as we know that we_x27;re pushing an NSH header already, it just creates extra nesting, but that_x27;s how uAPI works today. So, keeping as it is. (CVE-2025-68785) In the Linux kernel, the following vulnerability has been resolved: RDMA/cm: Fix leaking the multicast GID table reference If the CM ID is destroyed while the CM event for multicast creating is still queued the cancel_work_sync() will prevent the work from running which also prevents destroying the ah_attr. This leaks a refcount and triggers a WARN: GID entry ref leak for dev syz1 index 2 ref=573 WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 release_gid_table drivers/infiniband/core/cache.c:806 [inline] WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 gid_table_release_one+0x284/0x3cc drivers/infiniband/core/cache.c:886 Destroy the ah_attr after canceling the work, it is safe to call this twice. (CVE-2025-71084) In the Linux kernel, the following vulnerability has been resolved: ACPICA: Avoid walking the Namespace if start_node is NULL Although commit 0c9992315e73 ("ACPICA: Avoid walking the ACPI Namespace if it is not there") fixed the situation when both start_node and acpi_gbl_root_node are NULL, the Linux kernel mainline now still crashed on Honor Magicbook 14 Pro [1]. That happens due to the access to the member of parent_node in acpi_ns_get_next_node(). The NULL pointer dereference will always happen, no matter whether or not the start_node is equal to ACPI_ROOT_OBJECT, so move the check of start_node being NULL out of the if block. Unfortunately, all the attempts to contact Honor have failed, they refused to provide any technical support for Linux. The bad DSDT table_x27;s dump could be found on GitHub [2]. DMI: HONOR FMB-P/FMB-P-PCB, BIOS 1.13 05/08/2025 [ rjw: Subject adjustment, changelog edits ] (CVE-2025-71118) In the Linux kernel, the following vulnerability has been resolved: iomap: adjust read range correctly for non-block-aligned positions iomap_adjust_read_range() assumes that the position and length passed in are block-aligned. This is not always the case however, as shown in the syzbot generated case for erofs. This causes too many bytes to be skipped for uptodate blocks, which results in returning the incorrect position and length to read in. If all the blocks are uptodate, this underflows length and returns a position beyond the folio. Fix the calculation to also take into account the block offset when calculating how many bytes can be skipped for uptodate blocks. (CVE-2025-68794) In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv() Blamed commit did not take care of VLAN encapsulations as spotted by syzbot [1]. Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull(). [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729 __ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860 ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903 gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1 ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500 ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:318 [inline] ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core net/core/dev.c:6139 [inline] __netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252 netif_receive_skb_internal net/core/dev.c:6338 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6397 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4960 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586 __alloc_skb+0x805/0x1040 net/core/skbuff.c:690 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712 sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995 tun_alloc_skb drivers/net/tun.c:1461 [inline] tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 (CVE-2026-23003) In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: do not free existing class in qfq_change_class() Fixes qfq_change_class() error case. cl->qdisc and cl should only be freed if a new class and qdisc were allocated, or we risk various UAF. (CVE-2026-22999) In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop Currently this is checked before running the pending work. Normally this is quite fine, as work items either end up blocking (which will create a new worker for other items), or they complete fairly quickly. But syzbot reports an issue where io-wq takes seemingly forever to exit, and with a bit of debugging, this turns out to be because it queues a bunch of big (2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn_x27;t support ->read_iter(), loop_rw_iter() ends up handling them. Each read returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of these pending, processing the whole chain can take a long time. Easily longer than the syzbot uninterruptible sleep timeout of 140 seconds. This then triggers a complaint off the io-wq exit path: INFO: task syz.4.135:6326 blocked for more than 143 seconds. Not tainted syzkaller #0 Blocked by coredump. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000 Call Trace: <TASK> context_switch kernel/sched/core.c:5256 [inline] __schedule+0x1139/0x6150 kernel/sched/core.c:6863 __schedule_loop kernel/sched/core.c:6945 [inline] schedule+0xe7/0x3a0 kernel/sched/core.c:6960 schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75 do_wait_for_common kernel/sched/completion.c:100 [inline] __wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121 io_wq_exit_workers io_uring/io-wq.c:1328 [inline] io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356 io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203 io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651 io_uring_files_cancel include/linux/io_uring.h:19 [inline] do_exit+0x2ce/0x2bd0 kernel/exit.c:911 do_group_exit+0xd3/0x2a0 kernel/exit.c:1112 get_signal+0x2671/0x26d0 kernel/signal.c:3034 arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337 __exit_to_user_mode_loop kernel/entry/common.c:41 [inline] exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline] do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa02738f749 RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098 RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98 There_x27;s really nothing wrong here, outside of processing these reads will take a LONG time. However, we can speed up the exit by checking the IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will exit the ring after queueing up all of these reads. Then once the first item is processed, io-wq will simply cancel the rest. That should avoid syzbot running into this complaint again. (CVE-2026-23113) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Use disable_delayed_work_sync This makes use of disable_delayed_work_sync instead cancel_delayed_work_sync as it not only cancel the ongoing work but also disables new submit which is disarable since the object holding the work is about to be freed. (CVE-2024-56591) In the Linux kernel, the following vulnerability has been resolved: via_wdt: fix critical boot hang due to unnamed resource allocation The VIA watchdog driver uses allocate_resource() to reserve a MMIO region for the watchdog control register. However, the allocated resource was not given a name, which causes the kernel resource tree to contain an entry marked as "<BAD>" under /proc/iomem on x86 platforms. During boot, this unnamed resource can lead to a critical hang because subsequent resource lookups and conflict checks fail to handle the invalid entry properly. (CVE-2025-71114) In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Avoid truncating memory addresses On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem allocations to be backed by addresses physical memory above the 32-bit address limit, as found while experimenting with larger VMSPLIT configurations. This caused the qemu virt model to crash in the GICv3 driver, which allocates the _x27;itt_x27; object using GFP_KERNEL. Since all memory below the 4GB physical address limit is in ZONE_DMA in this configuration, kmalloc() defaults to higher addresses for ZONE_NORMAL, and the ITS driver stores the physical address in a 32-bit _x27;unsigned long_x27; variable. Change the itt_addr variable to the correct phys_addr_t type instead, along with all other variables in this driver that hold a physical address. The gicv5 driver correctly uses u64 variables, while all other irqchip drivers don_x27;t call virt_to_phys or similar interfaces. It_x27;s expected that other device drivers have similar issues, but fixing this one is sufficient for booting a virtio based guest. (CVE-2026-23085) In the Linux kernel, the following vulnerability has been resolved: vsock: fix lock inversion in vsock_assign_transport() Syzbot reported a potential lock inversion deadlock between vsock_register_mutex and sk_lock-AF_VSOCK when vsock_linger() is called. The issue was introduced by commit 687aa0c5581b ("vsock: Fix transport_* TOCTOU") which added vsock_register_mutex locking in vsock_assign_transport() around the transport->release() call, that can call vsock_linger(). vsock_assign_transport() can be called with sk_lock held. vsock_linger() calls sk_wait_event() that temporarily releases and re-acquires sk_lock. During this window, if another thread hold vsock_register_mutex while trying to acquire sk_lock, a circular dependency is created. Fix this by releasing vsock_register_mutex before calling transport->release() and vsock_deassign_transport(). This is safe because we don_x27;t need to hold vsock_register_mutex while releasing the old transport, and we ensure the new transport won_x27;t disappear by obtaining a module reference first via try_module_get(). (CVE-2025-40231) In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") added ttag bounds checking and data_offset validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate whether the command_x27;s data structures (cmd->req.sg and cmd->iov) have been properly initialized before processing H2C_DATA PDUs. The nvmet_tcp_build_pdu_iovec() function dereferences these pointers without NULL checks. This can be triggered by sending H2C_DATA PDU immediately after the ICREQ/ICRESP handshake, before sending a CONNECT command or NVMe write command. Attack vectors that trigger NULL pointer dereferences: 1. H2C_DATA PDU sent before CONNECT both pointers NULL 2. H2C_DATA PDU for READ command cmd->req.sg allocated, cmd->iov NULL 3. H2C_DATA PDU for uninitialized command slot both pointers NULL The fix validates both cmd->req.sg and cmd->iov before calling nvmet_tcp_build_pdu_iovec(). Both checks are required because: - Uninitialized commands: both NULL - READ commands: cmd->req.sg allocated, cmd->iov NULL - WRITE commands: both allocated (CVE-2026-22998) In the Linux kernel, the following vulnerability has been resolved: NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags When a filesystem is being automounted, it needs to preserve the user-set superblock mount options, such as the "ro" flag. (CVE-2025-68764) In the Linux kernel, the following vulnerability has been resolved: scsi: target: Reset t_task_cdb pointer in error case If allocation of cmd->t_task_cdb fails, it remains NULL but is later dereferenced in the _x27;err_x27; path. In case of error, reset NULL t_task_cdb value to point at the default fixed-size buffer. Found by Linux Verification Center (linuxtesting.org) with SVACE. (CVE-2025-68782) In the Linux kernel, the following vulnerability has been resolved: inet: frags: flush pending skbs in fqdir_pre_exit() We have been seeing occasional deadlocks on pernet_ops_rwsem since September in NIPA. The stuck task was usually modprobe (often loading a driver like ipvlan), trying to take the lock as a Writer. lockdep does not track readers for rwsems so the read wasn_x27;t obvious from the reports. On closer inspection the Reader holding the lock was conntrack looping forever in nf_conntrack_cleanup_net_list(). Based on past experience with occasional NIPA crashes I looked thru the tests which run before the crash and noticed that the crash follows ip_defrag.sh. An immediate red flag. Scouring thru (de)fragmentation queues reveals skbs sitting around, holding conntrack references. The problem is that since conntrack depends on nf_defrag_ipv6, nf_defrag_ipv6 will load first. Since nf_defrag_ipv6 loads first its netns exit hooks run _after_ conntrack_x27;s netns exit hook. Flush all fragment queue SKBs during fqdir_pre_exit() to release conntrack references before conntrack cleanup runs. Also flush the queues in timer expiry handlers when they discover fqdir->dead is set, in case packet sneaks in while we_x27;re running the pre_exit flush. The commit under Fixes is not exactly the culprit, but I think previously the timer firing would eventually unblock the spinning conntrack. (CVE-2025-68768) In the Linux kernel, the following vulnerability has been resolved: macvlan: fix possible UAF in macvlan_forward_source() Add RCU protection on (struct macvlan_source_entry)->vlan. Whenever macvlan_hash_del_source() is called, we must clear entry->vlan pointer before RCU grace period starts. This allows macvlan_forward_source() to skip over entries queued for freeing. Note that macvlan_dev are already RCU protected, as they are embedded in a standard netdev (netdev_priv(ndev)). https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u (CVE-2026-23001) In the Linux kernel, the following vulnerability has been resolved: net: sock: fix hardened usercopy panic in sock_recv_errqueue skbuff_fclone_cache was created without defining a usercopy region, [1] unlike skbuff_head_cache which properly whitelists the cb[] field. [2] This causes a usercopy BUG() when CONFIG_HARDENED_USERCOPY is enabled and the kernel attempts to copy sk_buff.cb data to userspace via sock_recv_errqueue() -> put_cmsg(). The crash occurs when: 1. TCP allocates an skb using alloc_skb_fclone() (from skbuff_fclone_cache) [1] 2. The skb is cloned via skb_clone() using the pre-allocated fclone [3] 3. The cloned skb is queued to sk_error_queue for timestamp reporting 4. Userspace reads the error queue via recvmsg(MSG_ERRQUEUE) 5. sock_recv_errqueue() calls put_cmsg() to copy serr->ee from skb->cb [4] 6. __check_heap_object() fails because skbuff_fclone_cache has no usercopy whitelist [5] When cloned skbs allocated from skbuff_fclone_cache are used in the socket error queue, accessing the sock_exterr_skb structure in skb->cb via put_cmsg() triggers a usercopy hardening violation: [ 5.379589] usercopy: Kernel memory exposure attempt detected from SLUB object _x27;skbuff_fclone_cache_x27; (offset 296, size 16)! [ 5.382796] kernel BUG at mm/usercopy.c:102! [ 5.383923] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI [ 5.384903] CPU: 1 UID: 0 PID: 138 Comm: poc_put_cmsg Not tainted 6.12.57 #7 [ 5.384903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 5.384903] RIP: 0010:usercopy_abort+0x6c/0x80 [ 5.384903] Code: 1a 86 51 48 c7 c2 40 15 1a 86 41 52 48 c7 c7 c0 15 1a 86 48 0f 45 d6 48 c7 c6 80 15 1a 86 48 89 c1 49 0f 45 f3 e8 84 27 88 ff <0f> 0b 490 [ 5.384903] RSP: 0018:ffffc900006f77a8 EFLAGS: 00010246 [ 5.384903] RAX: 000000000000006f RBX: ffff88800f0ad2a8 RCX: 1ffffffff0f72e74 [ 5.384903] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff87b973a0 [ 5.384903] RBP: 0000000000000010 R08: 0000000000000000 R09: fffffbfff0f72e74 [ 5.384903] R10: 0000000000000003 R11: 79706f6372657375 R12: 0000000000000001 [ 5.384903] R13: ffff88800f0ad2b8 R14: ffffea00003c2b40 R15: ffffea00003c2b00 [ 5.384903] FS: 0000000011bc4380(0000) GS:ffff8880bf100000(0000) knlGS:0000000000000000 [ 5.384903] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.384903] CR2: 000056aa3b8e5fe4 CR3: 000000000ea26004 CR4: 0000000000770ef0 [ 5.384903] PKRU: 55555554 [ 5.384903] Call Trace: [ 5.384903] <TASK> [ 5.384903] __check_heap_object+0x9a/0xd0 [ 5.384903] __check_object_size+0x46c/0x690 [ 5.384903] put_cmsg+0x129/0x5e0 [ 5.384903] sock_recv_errqueue+0x22f/0x380 [ 5.384903] tls_sw_recvmsg+0x7ed/0x1960 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? schedule+0x6d/0x270 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? mutex_unlock+0x81/0xd0 [ 5.384903] ? __pfx_mutex_unlock+0x10/0x10 [ 5.384903] ? __pfx_tls_sw_recvmsg+0x10/0x10 [ 5.384903] ? _raw_spin_lock_irqsave+0x8f/0xf0 [ 5.384903] ? _raw_read_unlock_irqrestore+0x20/0x40 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 The crash offset 296 corresponds to skb2->cb within skbuff_fclones: - sizeof(struct sk_buff) = 232 - offsetof(struct sk_buff, cb) = 40 - offset of skb2.cb in fclones = 232 + 40 = 272 - crash offset 296 = 272 + 24 (inside sock_exterr_skb.ee) This patch uses a local stack variable as a bounce buffer to avoid the hardened usercopy check failure. [1] https://elixir.bootlin.com/linux/v6.12.62/source/net/ipv4/tcp.c#L885 [2] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5104 [3] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5566 [4] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5491 [5] https://elixir.bootlin.com/linux/v6.12.62/source/mm/slub.c#L5719 (CVE-2026-22977) In the Linux kernel, the following vulnerability has been resolved: pnfs/flexfiles: Fix memory leak in nfs4_ff_alloc_deviceid_node() In nfs4_ff_alloc_deviceid_node(), if the allocation for ds_versions fails, the function jumps to the out_scratch label without freeing the already allocated dsaddrs list, leading to a memory leak. Fix this by jumping to the out_err_drain_dsaddrs label, which properly frees the dsaddrs list before cleaning up other resources. (CVE-2026-23038) In the Linux kernel, the following vulnerability has been resolved: libceph: make calc_target() set t->paused, not just clear it Currently calc_target() clears t->paused if the request shouldn_x27;t be paused anymore, but doesn_x27;t ever set t->paused even though it_x27;s able to determine when the request should be paused. Setting t->paused is left to __submit_request() which is fine for regular requests but doesn_x27;t work for linger requests -- since __submit_request() doesn_x27;t operate on linger requests, there is nowhere for lreq->t.paused to be set. One consequence of this is that watches don_x27;t get reestablished on paused -> unpaused transitions in cases where requests have been paused long enough for the (paused) unwatch request to time out and for the subsequent (re)watch request to enter the paused state. On top of the watch not getting reestablished, rbd_reregister_watch() gets stuck with rbd_dev->watch_mutex held: rbd_register_watch __rbd_register_watch ceph_osdc_watch linger_reg_commit_wait It_x27;s waiting for lreq->reg_commit_wait to be completed, but for that to happen the respective request needs to end up on need_resend_linger list and be kicked when requests are unpaused. There is no chance for that if the request in question is never marked paused in the first place. The fact that rbd_dev->watch_mutex remains taken out forever then prevents the image from getting unmapped -- "rbd unmap" would inevitably hang in D state on an attempt to grab the mutex. (CVE-2026-23047) In the Linux kernel, the following vulnerability has been resolved: net: hns3: using the num_tqps in the vf driver to apply for resources Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller than hdev->num_tqps, which causes some hdev->htqp[i] to remain uninitialized in hclgevf_knic_setup(). Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps, ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent and that all elements are properly initialized. (CVE-2025-71064) In the Linux kernel, the following vulnerability has been resolved: ipvlan: Make the addrs_lock be per port Make the addrs_lock be per port, not per ipvlan dev. Initial code seems to be written in the assumption, that any address change must occur under RTNL. But it is not so for the case of IPv6. So 1) Introduce per-port addrs_lock. 2) It was needed to fix places where it was forgotten to take lock (ipvlan_open/ipvlan_close) This appears to be a very minor problem though. Since it_x27;s highly unlikely that ipvlan_add_addr() will be called on 2 CPU simultaneously. But nevertheless, this could cause: 1) False-negative of ipvlan_addr_busy(): one interface iterated through all port->ipvlans + ipvlan->addrs under some ipvlan spinlock, and another added IP under its own lock. Though this is only possible for IPv6, since looks like only ipvlan_addr6_event() can be called without rtnl_lock. 2) Race since ipvlan_ht_addr_add(port) is called under different ipvlan->addrs_lock locks This should not affect performance, since add/remove IP is a rare situation and spinlock is not taken on fast paths. (CVE-2026-23103) In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: fix memory leak on usb_submit_urb() failure In async_set_registers(), when usb_submit_urb() fails, the allocated async_req structure and URB are not freed, causing a memory leak. The completion callback async_set_reg_cb() is responsible for freeing these allocations, but it is only called after the URB is successfully submitted and completes (successfully or with error). If submission fails, the callback never runs and the memory is leaked. Fix this by freeing both the URB and the request structure in the error path when usb_submit_urb() fails. (CVE-2025-71154) In the Linux kernel, the following vulnerability has been resolved: tracing: Do not register unsupported perf events Synthetic events currently do not have a function to register perf events. This leads to calling the tracepoint register functions with a NULL function pointer which triggers: ------------[ cut here ]------------ WARNING: kernel/tracepoint.c:175 at tracepoint_add_func+0x357/0x370, CPU#2: perf/2272 Modules linked in: kvm_intel kvm irqbypass CPU: 2 UID: 0 PID: 2272 Comm: perf Not tainted 6.18.0-ftest-11964-ge022764176fc-dirty #323 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:tracepoint_add_func+0x357/0x370 Code: 28 9c e8 4c 0b f5 ff eb 0f 4c 89 f7 48 c7 c6 80 4d 28 9c e8 ab 89 f4 ff 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc <0f> 0b 49 c7 c6 ea ff ff ff e9 ee fe ff ff 0f 0b e9 f9 fe ff ff 0f RSP: 0018:ffffabc0c44d3c40 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff9380aa9e4060 RCX: 0000000000000000 RDX: 000000000000000a RSI: ffffffff9e1d4a98 RDI: ffff937fcf5fd6c8 RBP: 0000000000000001 R08: 0000000000000007 R09: ffff937fcf5fc780 R10: 0000000000000003 R11: ffffffff9c193910 R12: 000000000000000a R13: ffffffff9e1e5888 R14: 0000000000000000 R15: ffffabc0c44d3c78 FS: 00007f6202f5f340(0000) GS:ffff93819f00f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055d3162281a8 CR3: 0000000106a56003 CR4: 0000000000172ef0 Call Trace: <TASK> tracepoint_probe_register+0x5d/0x90 synth_event_reg+0x3c/0x60 perf_trace_event_init+0x204/0x340 perf_trace_init+0x85/0xd0 perf_tp_event_init+0x2e/0x50 perf_try_init_event+0x6f/0x230 ? perf_event_alloc+0x4bb/0xdc0 perf_event_alloc+0x65a/0xdc0 __se_sys_perf_event_open+0x290/0x9f0 do_syscall_64+0x93/0x7b0 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? trace_hardirqs_off+0x53/0xc0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Instead, have the code return -ENODEV, which doesn_x27;t warn and has perf error out with: # perf record -e synthetic:futex_wait Error: The sys_perf_event_open() syscall returned with 19 (No such device) for event (synthetic:futex_wait). "dmesg | grep -i perf" may provide additional information. Ideally perf should support synthetic events, but for now just fix the warning. The support can come later. (CVE-2025-71125) In the Linux kernel, the following vulnerability has been resolved: net: hv_netvsc: reject RSS hash key programming without RX indirection table RSS configuration requires a valid RX indirection table. When the device reports a single receive queue, rndis_filter_device_add() does not allocate an indirection table, accepting RSS hash key updates in this state leads to a hang. Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return -EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device capabilities and prevents incorrect behavior. (CVE-2026-23054) In the Linux kernel, the following vulnerability has been resolved: iavf: fix off-by-one issues in iavf_config_rss_reg() There are off-by-one bugs when configuring RSS hash key and lookup table, causing out-of-bounds reads to memory [1] and out-of-bounds writes to device registers. Before commit 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS"), the loop upper bounds were: i <= I40E_VFQF_{HKEY,HLUT}_MAX_INDEX which is safe since the value is the last valid index. That commit changed the bounds to: i <= adapter->rss_{key,lut}_size / 4 where `rss_{key,lut}_size / 4` is the number of dwords, so the last valid index is `(rss_{key,lut}_size / 4) - 1`. Therefore, using `<=` accesses one element past the end. Fix the issues by using `<` instead of `<=`, ensuring we do not exceed the bounds. [1] KASAN splat about rss_key_size off-by-one BUG: KASAN: slab-out-of-bounds in iavf_config_rss+0x619/0x800 Read of size 4 at addr ffff888102c50134 by task kworker/u8:6/63 CPU: 0 UID: 0 PID: 63 Comm: kworker/u8:6 Not tainted 6.18.0-rc2-enjuk-tnguy-00378-g3005f5b77652-dirty #156 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: iavf iavf_watchdog_task Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x1a0 iavf_config_rss+0x619/0x800 iavf_watchdog_task+0x2be7/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 63: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x246/0x6f0 iavf_watchdog_task+0x28fc/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff888102c50100 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes to the right of allocated 52-byte region [ffff888102c50100, ffff888102c50134) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x102c50 flags: 0x200000000000000(node=0|zone=2) page_type: f5(slab) raw: 0200000000000000 ffff8881000418c0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080200020 00000000f5000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888102c50000: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc ffff888102c50080: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc >ffff888102c50100: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ^ ffff888102c50180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffff888102c50200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc (CVE-2025-71087) In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fw_tracer, Validate format string parameters Add validation for format string parameters in the firmware tracer to prevent potential security vulnerabilities and crashes from malformed format strings received from firmware. The firmware tracer receives format strings from the device firmware and uses them to format trace messages. Without proper validation, bad firmware could provide format strings with invalid format specifiers (e.g., %s, %p, %n) that could lead to crashes, or other undefined behavior. Add mlx5_tracer_validate_params() to validate that all format specifiers in trace strings are limited to safe integer/hex formats (%x, %d, %i, %u, %llx, %lx, etc.). Reject strings containing other format types that could be used to access arbitrary memory or cause crashes. Invalid format strings are added to the trace output for visibility with "BAD_FORMAT: " prefix. (CVE-2025-68816) In the Linux kernel, the following vulnerability has been resolved: sched/deadline: only set free_cpus for online runqueues Commit 16b269436b72 ("sched/deadline: Modify cpudl::free_cpus to reflect rd->online") introduced the cpudl_set/clear_freecpu functions to allow the cpu_dl::free_cpus mask to be manipulated by the deadline scheduler class rq_on/offline callbacks so the mask would also reflect this state. Commit 9659e1eeee28 ("sched/deadline: Remove cpu_active_mask from cpudl_find()") removed the check of the cpu_active_mask to save some processing on the premise that the cpudl::free_cpus mask already reflected the runqueue online state. Unfortunately, there are cases where it is possible for the cpudl_clear function to set the free_cpus bit for a CPU when the deadline runqueue is offline. When this occurs while a CPU is connected to the default root domain the flag may retain the bad state after the CPU has been unplugged. Later, a different CPU that is transitioning through the default root domain may push a deadline task to the powered down CPU when cpudl_find sees its free_cpus bit is set. If this happens the task will not have the opportunity to run. One example is outlined here: https://lore.kernel.org/lkml/20250110233010.2339521-1-opendmb@gmail.com Another occurs when the last deadline task is migrated from a CPU that has an offlined runqueue. The dequeue_task member of the deadline scheduler class will eventually call cpudl_clear and set the free_cpus bit for the CPU. This commit modifies the cpudl_clear function to be aware of the online state of the deadline runqueue so that the free_cpus mask can be updated appropriately. It is no longer necessary to manage the mask outside of the cpudl_set/clear functions so the cpudl_set/clear_freecpu functions are removed. In addition, since the free_cpus mask is now only updated under the cpudl lock the code was changed to use the non-atomic __cpumask functions. (CVE-2025-68780) HCE 2.0 bpftool-5.10.0-182.0.0.95.r3353_273.hce2.x86_64.rpm kernel-5.10.0-182.0.0.95.r3353_273.hce2.x86_64.rpm kernel-abi-stablelists-5.10.0-182.0.0.95.r3353_273.hce2.x86_64.rpm kernel-tools-5.10.0-182.0.0.95.r3353_273.hce2.x86_64.rpm kernel-tools-libs-5.10.0-182.0.0.95.r3353_273.hce2.x86_64.rpm kernel-tools-libs-devel-5.10.0-182.0.0.95.r3353_273.hce2.x86_64.rpm perf-5.10.0-182.0.0.95.r3353_273.hce2.x86_64.rpm python3-perf-5.10.0-182.0.0.95.r3353_273.hce2.x86_64.rpm bpftool-5.10.0-182.0.0.95.r3353_273.hce2.aarch64.rpm kernel-5.10.0-182.0.0.95.r3353_273.hce2.aarch64.rpm kernel-abi-stablelists-5.10.0-182.0.0.95.r3353_273.hce2.aarch64.rpm kernel-tools-5.10.0-182.0.0.95.r3353_273.hce2.aarch64.rpm kernel-tools-libs-5.10.0-182.0.0.95.r3353_273.hce2.aarch64.rpm kernel-tools-libs-devel-5.10.0-182.0.0.95.r3353_273.hce2.aarch64.rpm perf-5.10.0-182.0.0.95.r3353_273.hce2.aarch64.rpm python3-perf-5.10.0-182.0.0.95.r3353_273.hce2.aarch64.rpm kernel-devel-5.10.0-182.0.0.95.r3353_273.hce2.x86_64.rpm kernel-devel-5.10.0-182.0.0.95.r3353_273.hce2.aarch64.rpm kernel-headers-5.10.0-182.0.0.95.r3353_273.hce2.x86_64.rpm kernel-headers-5.10.0-182.0.0.95.r3353_273.hce2.aarch64.rpm