HCE2-SA-2025-0219 Important HCE 2.0 Security Fix(es): In the Linux kernel, the following vulnerability has been resolved: sched/core: Do not requeue task on CPU excluded from cpus_mask The following warning was triggered on a large machine early in boot on a distribution kernel but the same problem should also affect mainline. WARNING: CPU: 439 PID: 10 at ../kernel/workqueue.c:2231 process_one_work+0x4d/0x440 Call Trace: <TASK> rescuer_thread+0x1f6/0x360 kthread+0x156/0x180 ret_from_fork+0x22/0x30 </TASK> Commit c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") optimises ttwu by queueing a task that is descheduling on the wakelist, but does not check if the task descheduling is still allowed to run on that CPU. In this warning, the problematic task is a workqueue rescue thread which checks if the rescue is for a per-cpu workqueue and running on the wrong CPU. While this is early in boot and it should be possible to create workers, the rescue thread may still used if the MAYDAY_INITIAL_TIMEOUT is reached or MAYDAY_INTERVAL and on a sufficiently large machine, the rescue thread is being used frequently. Tracing confirmed that the task should have migrated properly using the stopper thread to handle the migration. However, a parallel wakeup from udev running on another CPU that does not share CPU cache observes p->on_cpu and uses task_cpu(p), queues the task on the old CPU and triggers the warning. Check that the wakee task that is descheduling is still allowed to run on its current CPU and if not, wait for the descheduling to complete and select an allowed CPU. (CVE-2022-50100) In the Linux kernel, the following vulnerability has been resolved: calipso: Don_x27;t call calipso functions for AF_INET sk. syzkaller reported a null-ptr-deref in txopt_get(). [0] The offset 0x70 was of struct ipv6_txoptions in struct ipv6_pinfo, so struct ipv6_pinfo was NULL there. However, this never happens for IPv6 sockets as inet_sk(sk)->pinet6 is always set in inet6_create(), meaning the socket was not IPv6 one. The root cause is missing validation in netlbl_conn_setattr(). netlbl_conn_setattr() switches branches based on struct sockaddr.sa_family, which is passed from userspace. However, netlbl_conn_setattr() does not check if the address family matches the socket. The syzkaller must have called connect() for an IPv6 address on an IPv4 socket. We have a proper validation in tcp_v[46]_connect(), but security_socket_connect() is called in the earlier stage. Let_x27;s copy the validation to netlbl_conn_setattr(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 2 UID: 0 PID: 12928 Comm: syz.9.1677 Not tainted 6.12.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:txopt_get include/net/ipv6.h:390 [inline] RIP: 0010: Code: 02 00 00 49 8b ac 24 f8 02 00 00 e8 84 69 2a fd e8 ff 00 16 fd 48 8d 7d 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 53 02 00 00 48 8b 6d 70 48 85 ed 0f 84 ab 01 00 RSP: 0018:ffff88811b8afc48 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: 1ffff11023715f8a RCX: ffffffff841ab00c RDX: 000000000000000e RSI: ffffc90007d9e000 RDI: 0000000000000070 RBP: 0000000000000000 R08: ffffed1023715f9d R09: ffffed1023715f9e R10: ffffed1023715f9d R11: 0000000000000003 R12: ffff888123075f00 R13: ffff88810245bd80 R14: ffff888113646780 R15: ffff888100578a80 FS: 00007f9019bd7640(0000) GS:ffff8882d2d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f901b927bac CR3: 0000000104788003 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <TASK> calipso_sock_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:557 netlbl_conn_setattr+0x10c/0x280 net/netlabel/netlabel_kapi.c:1177 selinux_netlbl_socket_connect_helper+0xd3/0x1b0 security/selinux/netlabel.c:569 selinux_netlbl_socket_connect_locked security/selinux/netlabel.c:597 [inline] selinux_netlbl_socket_connect+0xb6/0x100 security/selinux/netlabel.c:615 selinux_socket_connect+0x5f/0x80 security/selinux/hooks.c:4931 security_socket_connect+0x50/0xa0 security/security.c:4598 __sys_connect_file+0xa4/0x190 net/socket.c:2067 __sys_connect+0x12c/0x170 net/socket.c:2088 __do_sys_connect net/socket.c:2098 [inline] __se_sys_connect net/socket.c:2095 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:2095 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f901b61a12d Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9019bd6fa8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00007f901b925fa0 RCX: 00007f901b61a12d RDX: 000000000000001c RSI: 0000200000000140 RDI: 0000000000000003 RBP: 00007f901b701505 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f901b5b62a0 R15: 00007f9019bb7000 </TASK> Modules linked in: (CVE-2025-38147) In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: prime: fix ttm_bo_delayed_delete oops Fix an oops in ttm_bo_delayed_delete which results from dererencing a dangling pointer: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP CPU: 4 UID: 0 PID: 1082 Comm: kworker/u65:2 Not tainted 6.14.0-rc4-00267-g505460b44513-dirty #216 Hardware name: LENOVO 82N6/LNVNB161216, BIOS GKCN65WW 01/16/2024 Workqueue: ttm ttm_bo_delayed_delete [ttm] RIP: 0010:dma_resv_iter_first_unlocked+0x55/0x290 Code: 31 f6 48 c7 c7 00 2b fa aa e8 97 bd 52 ff e8 a2 c1 53 00 5a 85 c0 74 48 e9 88 01 00 00 4c 89 63 20 4d 85 e4 0f 84 30 01 00 00 <41> 8b 44 24 10 c6 43 2c 01 48 89 df 89 43 28 e8 97 fd ff ff 4c 8b RSP: 0018:ffffbf9383473d60 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffffbf9383473d88 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffbf9383473d78 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 6b6b6b6b6b6b6b6b R13: ffffa003bbf78580 R14: ffffa003a6728040 R15: 00000000000383cc FS: 0000000000000000(0000) GS:ffffa00991c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000758348024dd0 CR3: 000000012c259000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x26 ? die_addr+0x3d/0x70 ? exc_general_protection+0x159/0x460 ? asm_exc_general_protection+0x27/0x30 ? dma_resv_iter_first_unlocked+0x55/0x290 dma_resv_wait_timeout+0x56/0x100 ttm_bo_delayed_delete+0x69/0xb0 [ttm] process_one_work+0x217/0x5c0 worker_thread+0x1c8/0x3d0 ? apply_wqattrs_cleanup.part.0+0xc0/0xc0 kthread+0x10b/0x240 ? kthreads_online_cpu+0x140/0x140 ret_from_fork+0x40/0x70 ? kthreads_online_cpu+0x140/0x140 ret_from_fork_asm+0x11/0x20 </TASK> The cause of this is: - drm_prime_gem_destroy calls dma_buf_put(dma_buf) which releases the reference to the shared dma_buf. The reference count is 0, so the dma_buf is destroyed, which in turn decrements the corresponding amdgpu_bo reference count to 0, and the amdgpu_bo is destroyed - calling drm_gem_object_release then dma_resv_fini (which destroys the reservation object), then finally freeing the amdgpu_bo. - nouveau_bo obj->bo.base.resv is now a dangling pointer to the memory formerly allocated to the amdgpu_bo. - nouveau_gem_object_del calls ttm_bo_put(&nvbo->bo) which calls ttm_bo_release, which schedules ttm_bo_delayed_delete. - ttm_bo_delayed_delete runs and dereferences the dangling resv pointer, resulting in a general protection fault. Fix this by moving the drm_prime_gem_destroy call from nouveau_gem_object_del to nouveau_bo_del_ttm. This ensures that it will be run after ttm_bo_delayed_delete. (CVE-2025-37765) In the Linux kernel, the following vulnerability has been resolved: ipc: fix to protect IPCS lookups using RCU syzbot reported that it discovered a use-after-free vulnerability, [0] [0]: https://lore.kernel.org/all/67af13f8.050a0220.21dd3.0038.GAE@google.com/ idr_for_each() is protected by rwsem, but this is not enough. If it is not protected by RCU read-critical region, when idr_for_each() calls radix_tree_node_free() through call_rcu() to free the radix_tree_node structure, the node will be freed immediately, and when reading the next node in radix_tree_for_each_slot(), the already freed memory may be read. Therefore, we need to add code to make sure that idr_for_each() is protected within the RCU read-critical region when we call it in shm_destroy_orphaned(). (CVE-2025-38212) In the Linux kernel, the following vulnerability has been resolved: sched/rt: Fix race in push_rt_task Overview ======== When a CPU chooses to call push_rt_task and picks a task to push to another CPU_x27;s runqueue then it will call find_lock_lowest_rq method which would take a double lock on both CPUs_x27; runqueues. If one of the locks aren_x27;t readily available, it may lead to dropping the current runqueue lock and reacquiring both the locks at once. During this window it is possible that the task is already migrated and is running on some other CPU. These cases are already handled. However, if the task is migrated and has already been executed and another CPU is now trying to wake it up (ttwu) such that it is queued again on the runqeue (on_rq is 1) and also if the task was run by the same CPU, then the current checks will pass even though the task was migrated out and is no longer in the pushable tasks list. Crashes ======= This bug resulted in quite a few flavors of crashes triggering kernel panics with various crash signatures such as assert failures, page faults, null pointer dereferences, and queue corruption errors all coming from scheduler itself. Some of the crashes: -> kernel BUG at kernel/sched/rt.c:1616! BUG_ON(idx >= MAX_RT_PRIO) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? pick_next_task_rt+0x6e/0x1d0 ? do_error_trap+0x64/0xa0 ? pick_next_task_rt+0x6e/0x1d0 ? exc_invalid_op+0x4c/0x60 ? pick_next_task_rt+0x6e/0x1d0 ? asm_exc_invalid_op+0x12/0x20 ? pick_next_task_rt+0x6e/0x1d0 __schedule+0x5cb/0x790 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: kernel NULL pointer dereference, address: 00000000000000c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? __warn+0x8a/0xe0 ? exc_page_fault+0x3d6/0x520 ? asm_exc_page_fault+0x1e/0x30 ? pick_next_task_rt+0xb5/0x1d0 ? pick_next_task_rt+0x8c/0x1d0 __schedule+0x583/0x7e0 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: unable to handle page fault for address: ffff9464daea5900 kernel BUG at kernel/sched/rt.c:1861! BUG_ON(rq->cpu != task_cpu(p)) -> kernel BUG at kernel/sched/rt.c:1055! BUG_ON(!rq->nr_running) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? dequeue_top_rt_rq+0xa2/0xb0 ? do_error_trap+0x64/0xa0 ? dequeue_top_rt_rq+0xa2/0xb0 ? exc_invalid_op+0x4c/0x60 ? dequeue_top_rt_rq+0xa2/0xb0 ? asm_exc_invalid_op+0x12/0x20 ? dequeue_top_rt_rq+0xa2/0xb0 dequeue_rt_entity+0x1f/0x70 dequeue_task_rt+0x2d/0x70 __schedule+0x1a8/0x7e0 ? blk_finish_plug+0x25/0x40 schedule+0x3c/0xb0 futex_wait_queue_me+0xb6/0x120 futex_wait+0xd9/0x240 do_futex+0x344/0xa90 ? get_mm_exe_file+0x30/0x60 ? audit_exe_compare+0x58/0x70 ? audit_filter_rules.constprop.26+0x65e/0x1220 __x64_sys_futex+0x148/0x1f0 do_syscall_64+0x30/0x80 entry_SYSCALL_64_after_hwframe+0x62/0xc7 -> BUG: unable to handle page fault for address: ffff8cf3608bc2c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? spurious_kernel_fault+0x171/0x1c0 ? exc_page_fault+0x3b6/0x520 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? asm_exc_page_fault+0x1e/0x30 ? _cond_resched+0x15/0x30 ? futex_wait_queue_me+0xc8/0x120 ? futex_wait+0xd9/0x240 ? try_to_wake_up+0x1b8/0x490 ? futex_wake+0x78/0x160 ? do_futex+0xcd/0xa90 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? plist_del+0x6a/0xd0 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? dequeue_pushable_task+0x20/0x70 ? __schedule+0x382/0x7e0 ? asm_sysvec_reschedule_i ---truncated--- (CVE-2025-38234) In the Linux kernel, the following vulnerability has been resolved: net/sched: Abort __tc_modify_qdisc if parent class does not exist Lion_x27;s patch [1] revealed an ancient bug in the qdisc API. Whenever a user creates/modifies a qdisc specifying as a parent another qdisc, the qdisc API will, during grafting, detect that the user is not trying to attach to a class and reject. However grafting is performed after qdisc_create (and thus the qdiscs_x27; init callback) is executed. In qdiscs that eventually call qdisc_tree_reduce_backlog during init or change (such as fq, hhf, choke, etc), an issue arises. For example, executing the following commands: sudo tc qdisc add dev lo root handle a: htb default 2 sudo tc qdisc add dev lo parent a: handle beef fq Qdiscs such as fq, hhf, choke, etc unconditionally invoke qdisc_tree_reduce_backlog() in their control path init() or change() which then causes a failure to find the child class; however, that does not stop the unconditional invocation of the assumed child qdisc_x27;s qlen_notify with a null class. All these qdiscs make the assumption that class is non-null. The solution is ensure that qdisc_leaf() which looks up the parent class, and is invoked prior to qdisc_create(), should return failure on not finding the class. In this patch, we leverage qdisc_leaf to return ERR_PTRs whenever the parentid doesn_x27;t correspond to a class, so that we can detect it earlier on and abort before qdisc_create is called. [1] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/ (CVE-2025-38457) In the Linux kernel, the following vulnerability has been resolved: libnvdimm/labels: Fix divide error in nd_label_data_init() If a faulty CXL memory device returns a broken zero LSA size in its memory device information (Identify Memory Device (Opcode 4000h), CXL spec. 3.1, 8.2.9.9.1.1), a divide error occurs in the libnvdimm driver: Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:nd_label_data_init+0x10e/0x800 [libnvdimm] Code and flow: 1) CXL Command 4000h returns LSA size = 0 2) config_size is assigned to zero LSA size (CXL pmem driver): drivers/cxl/pmem.c: .config_size = mds->lsa_size, 3) max_xfer is set to zero (nvdimm driver): drivers/nvdimm/label.c: max_xfer = min_t(size_t, ndd->nsarea.max_xfer, config_size); 4) A subsequent DIV_ROUND_UP() causes a division by zero: drivers/nvdimm/label.c: /* Make our initial read size a multiple of max_xfer size */ drivers/nvdimm/label.c: read_size = min(DIV_ROUND_UP(read_size, max_xfer) * max_xfer, drivers/nvdimm/label.c- config_size); Fix this by checking the config size parameter by extending an existing check. (CVE-2025-38072) In the Linux kernel, the following vulnerability has been resolved: tipc: Fix use-after-free in tipc_conn_close(). syzbot reported a null-ptr-deref in tipc_conn_close() during netns dismantle. [0] tipc_topsrv_stop() iterates tipc_net(net)->topsrv->conn_idr and calls tipc_conn_close() for each tipc_conn. The problem is that tipc_conn_close() is called after releasing the IDR lock. At the same time, there might be tipc_conn_recv_work() running and it could call tipc_conn_close() for the same tipc_conn and release its last ->kref. Once we release the IDR lock in tipc_topsrv_stop(), there is no guarantee that the tipc_conn is alive. Let_x27;s hold the ref before releasing the lock and put the ref after tipc_conn_close() in tipc_topsrv_stop(). [0]: BUG: KASAN: use-after-free in tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165 Read of size 8 at addr ffff888099305a08 by task kworker/u4:3/435 CPU: 0 PID: 435 Comm: kworker/u4:3 Not tainted 4.19.204-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1fc/0x2ef lib/dump_stack.c:118 print_address_description.cold+0x54/0x219 mm/kasan/report.c:256 kasan_report_error.cold+0x8a/0x1b9 mm/kasan/report.c:354 kasan_report mm/kasan/report.c:412 [inline] __asan_report_load8_noabort+0x88/0x90 mm/kasan/report.c:433 tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165 tipc_topsrv_stop net/tipc/topsrv.c:701 [inline] tipc_topsrv_exit_net+0x27b/0x5c0 net/tipc/topsrv.c:722 ops_exit_list+0xa5/0x150 net/core/net_namespace.c:153 cleanup_net+0x3b4/0x8b0 net/core/net_namespace.c:553 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Allocated by task 23: kmem_cache_alloc_trace+0x12f/0x380 mm/slab.c:3625 kmalloc include/linux/slab.h:515 [inline] kzalloc include/linux/slab.h:709 [inline] tipc_conn_alloc+0x43/0x4f0 net/tipc/topsrv.c:192 tipc_topsrv_accept+0x1b5/0x280 net/tipc/topsrv.c:470 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Freed by task 23: __cache_free mm/slab.c:3503 [inline] kfree+0xcc/0x210 mm/slab.c:3822 tipc_conn_kref_release net/tipc/topsrv.c:150 [inline] kref_put include/linux/kref.h:70 [inline] conn_put+0x2cd/0x3a0 net/tipc/topsrv.c:155 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 The buggy address belongs to the object at ffff888099305a00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 8 bytes inside of 512-byte region [ffff888099305a00, ffff888099305c00) The buggy address belongs to the page: page:ffffea000264c140 count:1 mapcount:0 mapping:ffff88813bff0940 index:0x0 flags: 0xfff00000000100(slab) raw: 00fff00000000100 ffffea00028b6b88 ffffea0002cd2b08 ffff88813bff0940 raw: 0000000000000000 ffff888099305000 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888099305900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888099305a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888099305a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb (CVE-2025-38464) In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace Call kvm_init() only after _all_ setup is complete, as kvm_init() exposes /dev/kvm to userspace and thus allows userspace to create VMs (and call other ioctls). E.g. KVM will encounter a NULL pointer when attempting to add a vCPU to the per-CPU loaded_vmcss_on_cpu list if userspace is able to create a VM before vmx_init() configures said list. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP CPU: 6 PID: 1143 Comm: stable Not tainted 6.0.0-rc7+ #988 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:vmx_vcpu_load_vmcs+0x68/0x230 [kvm_intel] <TASK> vmx_vcpu_load+0x16/0x60 [kvm_intel] kvm_arch_vcpu_load+0x32/0x1f0 [kvm] vcpu_load+0x2f/0x40 [kvm] kvm_arch_vcpu_create+0x231/0x310 [kvm] kvm_vm_ioctl+0x79f/0xe10 [kvm] ? handle_mm_fault+0xb1/0x220 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f5a6b05743b </TASK> Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel(+) kvm irqbypass (CVE-2022-49932) In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix the dead loop of MPLS parse The unexpected MPLS packet may not end with the bottom label stack. When there are many stacks, The label count value has wrapped around. A dead loop occurs, soft lockup/CPU stuck finally. stack backtrace: UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26 index -1 is out of range for type _x27;__be32 [3]_x27; CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021 Call Trace: <IRQ> show_stack+0x52/0x5c dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_out_of_bounds.cold+0x44/0x49 key_extract_l3l4+0x82a/0x840 [openvswitch] ? kfree_skbmem+0x52/0xa0 key_extract+0x9c/0x2b0 [openvswitch] ovs_flow_key_extract+0x124/0x350 [openvswitch] ovs_vport_receive+0x61/0xd0 [openvswitch] ? kernel_init_free_pages.part.0+0x4a/0x70 ? get_page_from_freelist+0x353/0x540 netdev_port_receive+0xc4/0x180 [openvswitch] ? netdev_port_receive+0x180/0x180 [openvswitch] netdev_frame_hook+0x1f/0x40 [openvswitch] __netif_receive_skb_core.constprop.0+0x23a/0xf00 __netif_receive_skb_list_core+0xfa/0x240 netif_receive_skb_list_internal+0x18e/0x2a0 napi_complete_done+0x7a/0x1c0 bnxt_poll+0x155/0x1c0 [bnxt_en] __napi_poll+0x30/0x180 net_rx_action+0x126/0x280 ? bnxt_msix+0x67/0x80 [bnxt_en] handle_softirqs+0xda/0x2d0 irq_exit_rcu+0x96/0xc0 common_interrupt+0x8e/0xa0 </IRQ> (CVE-2025-38146) In the Linux kernel, the following vulnerability has been resolved: drm/gem: Acquire references on GEM handles for framebuffers A GEM handle can be released while the GEM buffer object is attached to a DRM framebuffer. This leads to the release of the dma-buf backing the buffer object, if any. [1] Trying to use the framebuffer in further mode-setting operations leads to a segmentation fault. Most easily happens with driver that use shadow planes for vmap-ing the dma-buf during a page flip. An example is shown below. [ 156.791968] ------------[ cut here ]------------ [ 156.796830] WARNING: CPU: 2 PID: 2255 at drivers/dma-buf/dma-buf.c:1527 dma_buf_vmap+0x224/0x430 [...] [ 156.942028] RIP: 0010:dma_buf_vmap+0x224/0x430 [ 157.043420] Call Trace: [ 157.045898] <TASK> [ 157.048030] ? show_trace_log_lvl+0x1af/0x2c0 [ 157.052436] ? show_trace_log_lvl+0x1af/0x2c0 [ 157.056836] ? show_trace_log_lvl+0x1af/0x2c0 [ 157.061253] ? drm_gem_shmem_vmap+0x74/0x710 [ 157.065567] ? dma_buf_vmap+0x224/0x430 [ 157.069446] ? __warn.cold+0x58/0xe4 [ 157.073061] ? dma_buf_vmap+0x224/0x430 [ 157.077111] ? report_bug+0x1dd/0x390 [ 157.080842] ? handle_bug+0x5e/0xa0 [ 157.084389] ? exc_invalid_op+0x14/0x50 [ 157.088291] ? asm_exc_invalid_op+0x16/0x20 [ 157.092548] ? dma_buf_vmap+0x224/0x430 [ 157.096663] ? dma_resv_get_singleton+0x6d/0x230 [ 157.101341] ? __pfx_dma_buf_vmap+0x10/0x10 [ 157.105588] ? __pfx_dma_resv_get_singleton+0x10/0x10 [ 157.110697] drm_gem_shmem_vmap+0x74/0x710 [ 157.114866] drm_gem_vmap+0xa9/0x1b0 [ 157.118763] drm_gem_vmap_unlocked+0x46/0xa0 [ 157.123086] drm_gem_fb_vmap+0xab/0x300 [ 157.126979] drm_atomic_helper_prepare_planes.part.0+0x487/0xb10 [ 157.133032] ? lockdep_init_map_type+0x19d/0x880 [ 157.137701] drm_atomic_helper_commit+0x13d/0x2e0 [ 157.142671] ? drm_atomic_nonblocking_commit+0xa0/0x180 [ 157.147988] drm_mode_atomic_ioctl+0x766/0xe40 [...] [ 157.346424] ---[ end trace 0000000000000000 ]--- Acquiring GEM handles for the framebuffer_x27;s GEM buffer objects prevents this from happening. The framebuffer_x27;s cleanup later puts the handle references. Commit 1a148af06000 ("drm/gem-shmem: Use dma_buf from GEM object instance") triggers the segmentation fault easily by using the dma-buf field more widely. The underlying issue with reference counting has been present before. v2: - acquire the handle instead of the BO (Christian) - fix comment style (Christian) - drop the Fixes tag (Christian) - rename err_ gotos - add missing Link tag (CVE-2025-38449) In the Linux kernel, the following vulnerability has been resolved: netlink: Fix wraparounds of sk->sk_rmem_alloc. Netlink has this pattern in some places if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) atomic_add(skb->truesize, &sk->sk_rmem_alloc); , which has the same problem fixed by commit 5a465a0da13e ("udp: Fix multiple wraparounds of sk->sk_rmem_alloc."). For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition is always false as the two operands are of int. Then, a single socket can eat as many skb as possible until OOM happens, and we can see multiple wraparounds of sk->sk_rmem_alloc. Let_x27;s fix it by using atomic_add_return() and comparing the two variables as unsigned int. Before: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port -1668710080 0 rtnl:nl_wraparound/293 * After: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port 2147483072 0 rtnl:nl_wraparound/290 * ^ `--- INT_MAX - 576 (CVE-2025-38465) In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: don_x27;t restore null sk_state_change queue->state_change is set as part of nvmet_tcp_set_queue_sock(), but if the TCP connection isn_x27;t established when nvmet_tcp_set_queue_sock() is called then queue->state_change isn_x27;t set and sock->sk->sk_state_change isn_x27;t replaced. As such we don_x27;t need to restore sock->sk->sk_state_change if queue->state_change is NULL. This avoids NULL pointer dereferences such as this: [ 286.462026][ C0] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 286.462814][ C0] #PF: supervisor instruction fetch in kernel mode [ 286.463796][ C0] #PF: error_code(0x0010) - not-present page [ 286.464392][ C0] PGD 8000000140620067 P4D 8000000140620067 PUD 114201067 PMD 0 [ 286.465086][ C0] Oops: Oops: 0010 [#1] SMP KASAN PTI [ 286.465559][ C0] CPU: 0 UID: 0 PID: 1628 Comm: nvme Not tainted 6.15.0-rc2+ #11 PREEMPT(voluntary) [ 286.466393][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 286.467147][ C0] RIP: 0010:0x0 [ 286.467420][ C0] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 286.467977][ C0] RSP: 0018:ffff8883ae008580 EFLAGS: 00010246 [ 286.468425][ C0] RAX: 0000000000000000 RBX: ffff88813fd34100 RCX: ffffffffa386cc43 [ 286.469019][ C0] RDX: 1ffff11027fa68b6 RSI: 0000000000000008 RDI: ffff88813fd34100 [ 286.469545][ C0] RBP: ffff88813fd34160 R08: 0000000000000000 R09: ffffed1027fa682c [ 286.470072][ C0] R10: ffff88813fd34167 R11: 0000000000000000 R12: ffff88813fd344c3 [ 286.470585][ C0] R13: ffff88813fd34112 R14: ffff88813fd34aec R15: ffff888132cdd268 [ 286.471070][ C0] FS: 00007fe3c04c7d80(0000) GS:ffff88840743f000(0000) knlGS:0000000000000000 [ 286.471644][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 286.472543][ C0] CR2: ffffffffffffffd6 CR3: 000000012daca000 CR4: 00000000000006f0 [ 286.473500][ C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 286.474467][ C0] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 [ 286.475453][ C0] Call Trace: [ 286.476102][ C0] <IRQ> [ 286.476719][ C0] tcp_fin+0x2bb/0x440 [ 286.477429][ C0] tcp_data_queue+0x190f/0x4e60 [ 286.478174][ C0] ? __build_skb_around+0x234/0x330 [ 286.478940][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.479659][ C0] ? __pfx_tcp_data_queue+0x10/0x10 [ 286.480431][ C0] ? tcp_try_undo_loss+0x640/0x6c0 [ 286.481196][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 286.482046][ C0] ? kvm_clock_get_cycles+0x14/0x30 [ 286.482769][ C0] ? ktime_get+0x66/0x150 [ 286.483433][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.484146][ C0] tcp_rcv_established+0x6e4/0x2050 [ 286.484857][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.485523][ C0] ? ipv4_dst_check+0x160/0x2b0 [ 286.486203][ C0] ? __pfx_tcp_rcv_established+0x10/0x10 [ 286.486917][ C0] ? lock_release+0x217/0x2c0 [ 286.487595][ C0] tcp_v4_do_rcv+0x4d6/0x9b0 [ 286.488279][ C0] tcp_v4_rcv+0x2af8/0x3e30 [ 286.488904][ C0] ? raw_local_deliver+0x51b/0xad0 [ 286.489551][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.490198][ C0] ? __pfx_tcp_v4_rcv+0x10/0x10 [ 286.490813][ C0] ? __pfx_raw_local_deliver+0x10/0x10 [ 286.491487][ C0] ? __pfx_nf_confirm+0x10/0x10 [nf_conntrack] [ 286.492275][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.492900][ C0] ip_protocol_deliver_rcu+0x8f/0x370 [ 286.493579][ C0] ip_local_deliver_finish+0x297/0x420 [ 286.494268][ C0] ip_local_deliver+0x168/0x430 [ 286.494867][ C0] ? __pfx_ip_local_deliver+0x10/0x10 [ 286.495498][ C0] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 286.496204][ C0] ? ip_rcv_finish_core+0x19a/0x1f20 [ 286.496806][ C0] ? lock_release+0x217/0x2c0 [ 286.497414][ C0] ip_rcv+0x455/0x6e0 [ 286.497945][ C0] ? __pfx_ip_rcv+0x10/0x10 [ ---truncated--- (CVE-2025-38035) In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port() The function core_scsi3_decode_spec_i_port(), in its error code path, unconditionally calls core_scsi3_lunacl_undepend_item() passing the dest_se_deve pointer, which may be NULL. This can lead to a NULL pointer dereference if dest_se_deve remains unset. SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg Unable to handle kernel paging request at virtual address dfff800000000012 Call trace: core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P) core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod] core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod] target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod] Fix this by adding a NULL check before calling core_scsi3_lunacl_undepend_item() (CVE-2025-38399) In the Linux kernel, the following vulnerability has been resolved: fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass Export anon_inode_make_secure_inode() to allow KVM guest_memfd to create anonymous inodes with proper security context. This replaces the current pattern of calling alloc_anon_inode() followed by inode_init_security_anon() for creating security context manually. This change also fixes a security regression in secretmem where the S_PRIVATE flag was not cleared after alloc_anon_inode(), causing LSM/SELinux checks to be bypassed for secretmem file descriptors. As guest_memfd currently resides in the KVM module, we need to export this symbol for use outside the core kernel. In the future, guest_memfd might be moved to core-mm, at which point the symbols no longer would have to be exported. When/if that happens is still unclear. (CVE-2025-38396) In the Linux kernel, the following vulnerability has been resolved: tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer The reproduction steps: 1. create a tun interface 2. enable l2 bearer 3. TIPC_NL_UDP_GET_REMOTEIP with media name set to tun tipc: Started in network mode tipc: Node identity 8af312d38a21, cluster identity 4711 tipc: Enabled bearer <eth:syz_tun>, priority 1 Oops: general protection fault KASAN: null-ptr-deref in range CPU: 1 UID: 1000 PID: 559 Comm: poc Not tainted 6.16.0-rc1+ #117 PREEMPT Hardware name: QEMU Ubuntu 24.04 PC RIP: 0010:tipc_udp_nl_dump_remoteip+0x4a4/0x8f0 the ub was in fact a struct dev. when bid != 0 && skip_cnt != 0, bearer_list[bid] may be NULL or other media when other thread changes it. fix this by checking media_id. (CVE-2025-38184) In the Linux kernel, the following vulnerability has been resolved: pinmux: fix race causing mux_owner NULL with active mux_usecount commit 5a3e85c3c397 ("pinmux: Use sequential access to access desc->pinmux data") tried to address the issue when two client of the same gpio calls pinctrl_select_state() for the same functionality, was resulting in NULL pointer issue while accessing desc->mux_owner. However, issue was not completely fixed due to the way it was handled and it can still result in the same NULL pointer. The issue occurs due to the following interleaving: cpu0 (process A) cpu1 (process B) pin_request() { pin_free() { mutex_lock() desc->mux_usecount--; //becomes 0 .. mutex_unlock() mutex_lock(desc->mux) desc->mux_usecount++; // becomes 1 desc->mux_owner = owner; mutex_unlock(desc->mux) mutex_lock(desc->mux) desc->mux_owner = NULL; mutex_unlock(desc->mux) This sequence leads to a state where the pin appears to be in use (`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can cause NULL pointer on next pin_request on the same pin. Ensure that updates to mux_usecount and mux_owner are performed atomically under the same lock. Only clear mux_owner when mux_usecount reaches zero and no new owner has been assigned. (CVE-2025-38632) In the Linux kernel, the following vulnerability has been resolved: perf: Fix sample vs do_exit() Baisheng Gao reported an ARM64 crash, which Mark decoded as being a synchronous external abort -- most likely due to trying to access MMIO in bad ways. The crash further shows perf trying to do a user stack sample while in exit_mmap()_x27;s tlb_finish_mmu() -- i.e. while tearing down the address space it is trying to access. It turns out that we stop perf after we tear down the userspace mm; a receipie for disaster, since perf likes to access userspace for various reasons. Flip this order by moving up where we stop perf in do_exit(). Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER to abort when the current task does not have an mm (exit_mm() makes sure to set current->mm = NULL; before commencing with the actual teardown). Such that CPU wide events don_x27;t trip on this same problem. (CVE-2025-38424) In the Linux kernel, the following vulnerability has been resolved: fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod() In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000, cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It_x27;s then passed to fb_cvt_hperiod(), where it_x27;s used as a divider -- division by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to avoid such overflow... Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. (CVE-2025-38312) In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix crash due to stale SRB access around I/O timeouts Ensure SRB is returned during I/O timeout error escalation. If that is not possible fail the escalation path. Following crash stack was seen: BUG: unable to handle kernel paging request at 0000002f56aa90f8 IP: qla_chk_edif_rx_sa_delete_pending+0x14/0x30 [qla2xxx] Call Trace: ? qla2x00_status_entry+0x19f/0x1c50 [qla2xxx] ? qla2x00_start_sp+0x116/0x1170 [qla2xxx] ? dma_pool_alloc+0x1d6/0x210 ? mempool_alloc+0x54/0x130 ? qla24xx_process_response_queue+0x548/0x12b0 [qla2xxx] ? qla_do_work+0x2d/0x40 [qla2xxx] ? process_one_work+0x14c/0x390 (CVE-2022-50098) In the Linux kernel, the following vulnerability has been resolved: rseq: Fix segfault on registration when rseq_cs is non-zero The rseq_cs field is documented as being set to 0 by user-space prior to registration, however this is not currently enforced by the kernel. This can result in a segfault on return to user-space if the value stored in the rseq_cs field doesn_x27;t point to a valid struct rseq_cs. The correct solution to this would be to fail the rseq registration when the rseq_cs field is non-zero. However, some older versions of glibc will reuse the rseq area of previous threads without clearing the rseq_cs field and will also terminate the process if the rseq registration fails in a secondary thread. This wasn_x27;t caught in testing because in this case the leftover rseq_cs does point to a valid struct rseq_cs. What we can do is clear the rseq_cs field on registration when it_x27;s non-zero which will prevent segfaults on registration and won_x27;t break the glibc versions that reuse rseq areas on thread creation. (CVE-2025-38067) In the Linux kernel, the following vulnerability has been resolved: perf: Revert to requiring CAP_SYS_ADMIN for uprobes Jann reports that uprobes can be used destructively when used in the middle of an instruction. The kernel only verifies there is a valid instruction at the requested offset, but due to variable instruction length cannot determine if this is an instruction as seen by the intended execution stream. Additionally, Mark Rutland notes that on architectures that mix data in the text segment (like arm64), a similar things can be done if the data word is _x27;mistaken_x27; for an instruction. As such, require CAP_SYS_ADMIN for uprobes. (CVE-2025-38466) In the Linux kernel, the following vulnerability has been resolved: ext4: inline: fix len overflow in ext4_prepare_inline_data When running the following code on an ext4 filesystem with inline_data feature enabled, it will lead to the bug below. fd = open("file1", O_RDWR | O_CREAT | O_TRUNC, 0666); ftruncate(fd, 30); pwrite(fd, "a", 1, (1UL << 40) + 5UL); That happens because write_begin will succeed as when ext4_generic_write_inline_data calls ext4_prepare_inline_data, pos + len will be truncated, leading to ext4_prepare_inline_data parameter to be 6 instead of 0x10000000006. Then, later when write_end is called, we hit: BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); at ext4_write_inline_data. Fix it by using a loff_t type for the len parameter in ext4_prepare_inline_data instead of an unsigned int. [ 44.545164] ------------[ cut here ]------------ [ 44.545530] kernel BUG at fs/ext4/inline.c:240! [ 44.545834] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 44.546172] CPU: 3 UID: 0 PID: 343 Comm: test Not tainted 6.15.0-rc2-00003-g9080916f4863 #45 PREEMPT(full) 112853fcebfdb93254270a7959841d2c6aa2c8bb [ 44.546523] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 44.546523] RIP: 0010:ext4_write_inline_data+0xfe/0x100 [ 44.546523] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49 [ 44.546523] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216 [ 44.546523] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006 [ 44.546523] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738 [ 44.546523] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [ 44.546523] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000 [ 44.546523] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738 [ 44.546523] FS: 00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000 [ 44.546523] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 44.546523] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0 [ 44.546523] PKRU: 55555554 [ 44.546523] Call Trace: [ 44.546523] <TASK> [ 44.546523] ext4_write_inline_data_end+0x126/0x2d0 [ 44.546523] generic_perform_write+0x17e/0x270 [ 44.546523] ext4_buffered_write_iter+0xc8/0x170 [ 44.546523] vfs_write+0x2be/0x3e0 [ 44.546523] __x64_sys_pwrite64+0x6d/0xc0 [ 44.546523] do_syscall_64+0x6a/0xf0 [ 44.546523] ? __wake_up+0x89/0xb0 [ 44.546523] ? xas_find+0x72/0x1c0 [ 44.546523] ? next_uptodate_folio+0x317/0x330 [ 44.546523] ? set_pte_range+0x1a6/0x270 [ 44.546523] ? filemap_map_pages+0x6ee/0x840 [ 44.546523] ? ext4_setattr+0x2fa/0x750 [ 44.546523] ? do_pte_missing+0x128/0xf70 [ 44.546523] ? security_inode_post_setattr+0x3e/0xd0 [ 44.546523] ? ___pte_offset_map+0x19/0x100 [ 44.546523] ? handle_mm_fault+0x721/0xa10 [ 44.546523] ? do_user_addr_fault+0x197/0x730 [ 44.546523] ? do_syscall_64+0x76/0xf0 [ 44.546523] ? arch_exit_to_user_mode_prepare+0x1e/0x60 [ 44.546523] ? irqentry_exit_to_user_mode+0x79/0x90 [ 44.546523] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 44.546523] RIP: 0033:0x7f42999c6687 [ 44.546523] Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff [ 44.546523] RSP: 002b:00007ffeae4a7930 EFLAGS: 00000202 ORIG_RAX: 0000000000000012 [ 44.546523] RAX: ffffffffffffffda RBX: 00007f4299934740 RCX: 00007f42999c6687 [ 44.546523] RDX: 0000000000000001 RSI: 000055ea6149200f RDI: 0000000000000003 [ 44.546523] RBP: 00007ffeae4a79a0 R08: 0000000000000000 R09: 0000000000000000 [ 44.546523] R10: 0000010000000005 R11: 0000000000000202 R12: 0000 ---truncated--- (CVE-2025-38222) In the Linux kernel, the following vulnerability has been resolved: ACPICA: Refuse to evaluate a method if arguments are missing As reported in [1], a platform firmware update that increased the number of method parameters and forgot to update a least one of its callers, caused ACPICA to crash due to use-after-free. Since this a result of a clear AML issue that arguably cannot be fixed up by the interpreter (it cannot produce missing data out of thin air), address it by making ACPICA refuse to evaluate a method if the caller attempts to pass fewer arguments than expected to it. (CVE-2025-38386) In the Linux kernel, the following vulnerability has been resolved: tracing: Add down_write(trace_event_sem) when adding trace event When a module is loaded, it adds trace events defined by the module. It may also need to modify the modules trace printk formats to replace enum names with their values. If two modules are loaded at the same time, the adding of the event to the ftrace_events list can corrupt the walking of the list in the code that is modifying the printk format strings and crash the kernel. The addition of the event should take the trace_event_sem for write while it adds the new event. Also add a lockdep_assert_held() on that semaphore in __trace_add_event_dirs() as it iterates the list. (CVE-2025-38539) In the Linux kernel, the following vulnerability has been resolved: i2c: qup: jump out of the loop in case of timeout Original logic only sets the return value but doesn_x27;t jump out of the loop if the bus is kept active by a client. This is not expected. A malicious or buggy i2c client can hang the kernel in this case and should be avoided. This is observed during a long time test with a PCA953x GPIO extender. Fix it by changing the logic to not only sets the return value, but also jumps out of the loop and return to the caller with -ETIMEDOUT. (CVE-2025-38671) In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN We found a few different systems hung up in writeback waiting on the same page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in pnfs_update_layout(), however the pnfs_layout_hdr_x27;s plh_outstanding count was zero. It seems most likely that this is another race between the waiter and waker similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task"). Fix it up by applying the advised barrier. (CVE-2025-38393) In the Linux kernel, the following vulnerability has been resolved: HID: core: ensure the allocated report buffer can contain the reserved report ID When the report ID is not used, the low level transport drivers expect the first byte to be 0. However, currently the allocated buffer not account for that extra byte, meaning that instead of having 8 guaranteed bytes for implement to be working, we only have 7. (CVE-2025-38495) In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in do_register_framebuffer() fails to allocate memory for fb_videomode, it will later lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ Even though fbcon_init() checks beforehand if fb_match_mode() in var_to_display() fails, it can not prevent the panic because fbcon_init() does not return error code. Considering this and the comment in the code about fb_match_mode() returning NULL - "This should not happen" - it is better to prevent registering the fb_info if its mode was not set successfully. Also move fb_add_videomode() closer to the beginning of do_register_framebuffer() to avoid having to do the cleanup on fail. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. (CVE-2025-38215) In the Linux kernel, the following vulnerability has been resolved: pptp: ensure minimal skb length in pptp_xmit() Commit aabc6596ffb3 ("net: ppp: Add bound checking for skb data on ppp_sync_txmung") fixed ppp_sync_txmunge() We need a similar fix in pptp_xmit(), otherwise we might read uninit data as reported by syzbot. BUG: KMSAN: uninit-value in pptp_xmit+0xc34/0x2720 drivers/net/ppp/pptp.c:193 pptp_xmit+0xc34/0x2720 drivers/net/ppp/pptp.c:193 ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2290 [inline] ppp_input+0x1d6/0xe60 drivers/net/ppp/ppp_generic.c:2314 pppoe_rcv_core+0x1e8/0x760 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x142/0x420 include/net/sock.h:1148 __release_sock+0x1d3/0x330 net/core/sock.c:3213 release_sock+0x6b/0x270 net/core/sock.c:3767 pppoe_sendmsg+0x15d/0xcb0 drivers/net/ppp/pppoe.c:904 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:727 ____sys_sendmsg+0x893/0xd80 net/socket.c:2566 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2620 __sys_sendmmsg+0x2d9/0x7c0 net/socket.c:2709 (CVE-2025-38574) In the Linux kernel, the following vulnerability has been resolved: do_change_type(): refuse to operate on unmounted/not ours mounts Ensure that propagation settings can only be changed for mounts located in the caller_x27;s mount namespace. This change aligns permission checking with the rest of mount(2). (CVE-2025-38498) In the Linux kernel, the following vulnerability has been resolved: arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth() KASAN reports a stack-out-of-bounds read in regs_get_kernel_stack_nth(). Call Trace: [ 97.283505] BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.284677] Read of size 8 at addr ffff800089277c10 by task 1.sh/2550 [ 97.285732] [ 97.286067] CPU: 7 PID: 2550 Comm: 1.sh Not tainted 6.6.0+ #11 [ 97.287032] Hardware name: linux,dummy-virt (DT) [ 97.287815] Call trace: [ 97.288279] dump_backtrace+0xa0/0x128 [ 97.288946] show_stack+0x20/0x38 [ 97.289551] dump_stack_lvl+0x78/0xc8 [ 97.290203] print_address_description.constprop.0+0x84/0x3c8 [ 97.291159] print_report+0xb0/0x280 [ 97.291792] kasan_report+0x84/0xd0 [ 97.292421] __asan_load8+0x9c/0xc0 [ 97.293042] regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.293835] process_fetch_insn+0x770/0xa30 [ 97.294562] kprobe_trace_func+0x254/0x3b0 [ 97.295271] kprobe_dispatcher+0x98/0xe0 [ 97.295955] kprobe_breakpoint_handler+0x1b0/0x210 [ 97.296774] call_break_hook+0xc4/0x100 [ 97.297451] brk_handler+0x24/0x78 [ 97.298073] do_debug_exception+0xac/0x178 [ 97.298785] el1_dbg+0x70/0x90 [ 97.299344] el1h_64_sync_handler+0xcc/0xe8 [ 97.300066] el1h_64_sync+0x78/0x80 [ 97.300699] kernel_clone+0x0/0x500 [ 97.301331] __arm64_sys_clone+0x70/0x90 [ 97.302084] invoke_syscall+0x68/0x198 [ 97.302746] el0_svc_common.constprop.0+0x11c/0x150 [ 97.303569] do_el0_svc+0x38/0x50 [ 97.304164] el0_svc+0x44/0x1d8 [ 97.304749] el0t_64_sync_handler+0x100/0x130 [ 97.305500] el0t_64_sync+0x188/0x190 [ 97.306151] [ 97.306475] The buggy address belongs to stack of task 1.sh/2550 [ 97.307461] and is located at offset 0 in frame: [ 97.308257] __se_sys_clone+0x0/0x138 [ 97.308910] [ 97.309241] This frame has 1 object: [ 97.309873] [48, 184) _x27;args_x27; [ 97.309876] [ 97.310749] The buggy address belongs to the virtual mapping at [ 97.310749] [ffff800089270000, ffff800089279000) created by: [ 97.310749] dup_task_struct+0xc0/0x2e8 [ 97.313347] [ 97.313674] The buggy address belongs to the physical page: [ 97.314604] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14f69a [ 97.315885] flags: 0x15ffffe00000000(node=1|zone=2|lastcpupid=0xfffff) [ 97.316957] raw: 015ffffe00000000 0000000000000000 dead000000000122 0000000000000000 [ 97.318207] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 97.319445] page dumped because: kasan: bad access detected [ 97.320371] [ 97.320694] Memory state around the buggy address: [ 97.321511] ffff800089277b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.322681] ffff800089277b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.323846] >ffff800089277c00: 00 00 f1 f1 f1 f1 f1 f1 00 00 00 00 00 00 00 00 [ 97.325023] ^ [ 97.325683] ffff800089277c80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3 [ 97.326856] ffff800089277d00: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 This issue seems to be related to the behavior of some gcc compilers and was also fixed on the s390 architecture before: commit d93a855c31b7 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()") As described in that commit, regs_get_kernel_stack_nth() has confirmed that `addr` is on the stack, so reading the value at `*addr` should be allowed. Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case. [will: Use _x27;*addr_x27; as the argument to READ_ONCE_NOCHECK()] (CVE-2025-38320) In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse() Update struct hid_descriptor to better reflect the mandatory and optional parts of the HID Descriptor as per USB HID 1.11 specification. Note: the kernel currently does not parse any optional HID class descriptors, only the mandatory report descriptor. Update all references to member element desc[0] to rpt_desc. Add test to verify bLength and bNumDescriptors values are valid. Replace the for loop with direct access to the mandatory HID class descriptor member for the report descriptor. This eliminates the possibility of getting an out-of-bounds fault. Add a warning message if the HID descriptor contains any unsupported optional HID class descriptors. (CVE-2025-38103) In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: sanitize request list handling Validate the request in nvme_tcp_handle_r2t() to ensure it_x27;s not part of any list, otherwise a malicious R2T PDU might inject a loop in request list processing. (CVE-2025-38264) In the Linux kernel, the following vulnerability has been resolved: virtio-net: ensure the received length does not exceed allocated size In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check. (CVE-2025-38375) In the Linux kernel, the following vulnerability has been resolved: net: clear the dst when changing skb protocol A not-so-careful NAT46 BPF program can crash the kernel if it indiscriminately flips ingress packets from v4 to v6: BUG: kernel NULL pointer dereference, address: 0000000000000000 ip6_rcv_core (net/ipv6/ip6_input.c:190:20) ipv6_rcv (net/ipv6/ip6_input.c:306:8) process_backlog (net/core/dev.c:6186:4) napi_poll (net/core/dev.c:6906:9) net_rx_action (net/core/dev.c:7028:13) do_softirq (kernel/softirq.c:462:3) netif_rx (net/core/dev.c:5326:3) dev_loopback_xmit (net/core/dev.c:4015:2) ip_mc_finish_output (net/ipv4/ip_output.c:363:8) NF_HOOK (./include/linux/netfilter.h:314:9) ip_mc_output (net/ipv4/ip_output.c:400:5) dst_output (./include/net/dst.h:459:9) ip_local_out (net/ipv4/ip_output.c:130:9) ip_send_skb (net/ipv4/ip_output.c:1496:8) udp_send_skb (net/ipv4/udp.c:1040:8) udp_sendmsg (net/ipv4/udp.c:1328:10) The output interface has a 4->6 program attached at ingress. We try to loop the multicast skb back to the sending socket. Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr and changes skb->protocol to v6. We enter ip6_rcv_core which tries to use skb_dst(). But the dst is still an IPv4 one left after IPv4 mcast output. Clear the dst in all BPF helpers which change the protocol. Try to preserve metadata dsts, those may carry non-routing metadata. (CVE-2025-38192) In the Linux kernel, the following vulnerability has been resolved: perf/core: Prevent VMA split of buffer mappings The perf mmap code is careful about mmap()_x27;ing the user page with the ringbuffer and additionally the auxiliary buffer, when the event supports it. Once the first mapping is established, subsequent mapping have to use the same offset and the same size in both cases. The reference counting for the ringbuffer and the auxiliary buffer depends on this being correct. Though perf does not prevent that a related mapping is split via mmap(2), munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls, which take reference counts, but then the subsequent perf_mmap_close() calls are not longer fulfilling the offset and size checks. This leads to reference count leaks. As perf already has the requirement for subsequent mappings to match the initial mapping, the obvious consequence is that VMA splits, caused by resizing of a mapping or partial unmapping, have to be prevented. Implement the vm_operations_struct::may_split() callback and return unconditionally -EINVAL. That ensures that the mapping offsets and sizes cannot be changed after the fact. Remapping to a different fixed address with the same size is still possible as it takes the references for the new mapping and drops those of the old mapping. (CVE-2025-38563) In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del() If an exiting non-autoreaping task has already passed exit_notify() and calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent or debugger right after unlock_task_sighand(). If a concurrent posix_cpu_timer_del() runs at that moment, it won_x27;t be able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or lock_task_sighand() will fail. Add the tsk->exit_state check into run_posix_cpu_timers() to fix this. This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because exit_task_work() is called before exit_notify(). But the check still makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail anyway in this case. (CVE-2025-38352) HCE 2.0 bpftool-5.10.0-182.0.0.95.r3008_246.hce2.aarch64.rpm kernel-5.10.0-182.0.0.95.r3008_246.hce2.aarch64.rpm kernel-abi-stablelists-5.10.0-182.0.0.95.r3008_246.hce2.aarch64.rpm kernel-tools-5.10.0-182.0.0.95.r3008_246.hce2.aarch64.rpm kernel-tools-libs-5.10.0-182.0.0.95.r3008_246.hce2.aarch64.rpm kernel-tools-libs-devel-5.10.0-182.0.0.95.r3008_246.hce2.aarch64.rpm perf-5.10.0-182.0.0.95.r3008_246.hce2.aarch64.rpm python3-perf-5.10.0-182.0.0.95.r3008_246.hce2.aarch64.rpm bpftool-5.10.0-182.0.0.95.r3008_246.hce2.x86_64.rpm kernel-5.10.0-182.0.0.95.r3008_246.hce2.x86_64.rpm kernel-abi-stablelists-5.10.0-182.0.0.95.r3008_246.hce2.x86_64.rpm kernel-tools-5.10.0-182.0.0.95.r3008_246.hce2.x86_64.rpm kernel-tools-libs-5.10.0-182.0.0.95.r3008_246.hce2.x86_64.rpm kernel-tools-libs-devel-5.10.0-182.0.0.95.r3008_246.hce2.x86_64.rpm perf-5.10.0-182.0.0.95.r3008_246.hce2.x86_64.rpm python3-perf-5.10.0-182.0.0.95.r3008_246.hce2.x86_64.rpm kernel-devel-5.10.0-182.0.0.95.r3008_246.hce2.aarch64.rpm kernel-devel-5.10.0-182.0.0.95.r3008_246.hce2.x86_64.rpm kernel-headers-5.10.0-182.0.0.95.r3008_246.hce2.aarch64.rpm kernel-headers-5.10.0-182.0.0.95.r3008_246.hce2.x86_64.rpm